730 Articulated Truck

Engine ModelCat® C13

Bore5.1in

Stroke6.2in

Displacement762.8in³

Net Power - ISO 14396370hp

No Engine De-rating Below12500ft

Peak Engine Torque Speed1200r/min

Peak Engine Torque Net (SAE J1349)1564ft·lbf

Engine Model - U.S. EPA Tier 4 Final/EU Stage VCat C13

Peak Engine Torque Gross (SAE J1995)1579ft·lbf

Gross Power - SAE J1995:2014375hp

Net Power - SAE J1349:2011367hp

Note (3)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

EmissionsThe 730 meets Tier 4 Final and Stage V emission standards.

Note (2)The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.

Note (1)The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.

Note (4)Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.

Note (5)DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Rated Payload31ton (US)

Heaped (SAE 2:1)23yd³

Struck17.4yd³

Tailgate Heaped SAE 2:124.6yd³

Tailgate Struck18.2yd³

Forward - 15mile/h

Forward - 29mile/h

Forward - 314mile/h

Forward - 421mile/h

Forward - 529mile/h

Forward - 634mile/h

Reverse - 16mile/h

Fuel Tank108.8gal (US)

Cooling System21.9gal (US)

Hydraulic System29.1gal (US)

Engine Crankcase10gal (US)

Transmission12.4gal (US)

Final Drives/Differential33gal (US)

Output Transfer Gear Box6.3gal (US)

DEF Tank5.3gal (US)

Interior Cab72dB(A)

Note (1)The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the

Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Raise Time12s

Lower Time8s

BrakesISO 3450 – 2011

Cab - FOPSISO 3449 Level II – 2005

Cab - ROPSISO 3471 – 2008

SteeringISO 5010 – 2007

Front Axle - Empty33069lb

Front Axle - Loaded40300lb

Center Axle - Rated Load27249lb

Rear Axle - Loaded36817lb

Center Axle - Loaded37302lb

Total - Rated Load61729lb

Front Axle - Rated Load7231lb

Total - Loaded114420lb

Center Axle - Empty10053lb

Rear Axle - Empty9568lb

Total - Empty52690lb

Rear Axle - Rated Load27249lb

Lock to Lock4.75 seconds @ 60 rpm

TypeHigh strength Brinell HB450 wear resistant steel

Turning Dimensions - Aisle Width210in

Turning Dimensions - Steer Angle - Left/Right45°

Turning Dimensions - Inside Radius153in

Turning Dimensions - SAE Turning Radius294in

NoteDimensions are for machines equipped with 23.5R25 tires.

Turning Dimensions - Clearance Radius318in

Base Plate0.51in

Side Plates0.43in

Front Plate0.28in

Wheel Loaders: 966M/966M XE - Passes4

Wheel Loader: 962M - Passes4–5

Wheel Loader: 950M - Passes5

Hydraulic Excavators: 336F/336F XE - Passes5–6

Hydraulic Excavators: 349F/349F XE - Passes4–5

NoteAn optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased

Wheel Loaders: 972M/972M XE - Passes3–4

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Tilt and telescopic steering wheel

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Combined gear selection and hoist control lever

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Secondary steering – electro hydraulic

Heater and defroster with four-speed fan

Retractable belt: Operator seat and second seat

Windshield wiper and washer, two speed, intermittent (front)

Mirrors: extensive arrangement for improved visibility

Windshield wiper and washer, two speed (rear)

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Adjustable air vents

Windows opening both sides, tinted

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS) ready
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Sun visor

Touchscreen display incorporating the rearview camera video feed

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Air conditioning with R134A refrigerant

Standard

Cat Detect with Stability Assist

Product Link

Standard

Electrical system: 24-volt, 10A 24- to 12-volt converter

Main disconnect switch

Batteries (two) maintenance free

Remote starting receptacle (cables not included)

Horn

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators

Standard

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Auto shift six-speed forward and one reverse transmission

Dual circuit oil immersed, enclosed brakes – all wheels

Retarder: engine compression brake

Cat C13 engine

Three axle, six-wheel drive

Cat Clean Emission Module (CEM) and exhaust aftertreatment package

Standard

Rearview camera

ROPS/FOPS cab

Reverse alarm

Standard

Radiator

Rear window

Axle

Front dump body spill guard, integral part of fabricated body

Crankcase

Standard

Sound suppression (only standard in Europe)

Tires, six 23.5R25, radial

Vandalism protection: lockable caps

Mud flaps: wheel arch and body mounted with transportation tiebacks

S·O·S sampling valves

Optional

Window blinds

Auto lube installation for automatic greasing of bearings

Ether start

Cold weather start attachment

Four-point seat belt

Machine Security System (MSS)

Bare chassis (no body) standard wheel base

Fuel additive – anti-waxing

Sound suppression (only standard in Europe)

Cold weather coolant –51° C (–60° F)

Wheel chocks

Flashing LED beacon

Engine block heater

Bluetooth radio stereo system

Exhaust heated body

Product Link Elite: PLE631 (satellite), PLE641 (cellular). Product Link is optional.

Heated rearview motorized mirrors

Body liners

Bare chassis (no body) long wheel base

Infrared glass – high ambient cab

Heated/cooled seat

Roof mounted High Intensity Discharge (HID) work lights

Cat Production Measurement payload monitoring system

Fast fuel fill

Tires, six 750/65R25, radial

Scissor tailgate