D10 Dozer

The Cat® D10 Dozer is innovative by design — developed by a team of experts who follow a design approach that incorporates feedback from the field with industry-leading technologies to deliver a dozer that continues to advance with every model. The new D10 is no exception. It’s more efficient, so it burns less fuel. It’s more serviceable, so you’ll experience less downtime. It’s more durable, so you’ll spend less over its lifetime. And it’s more productive — so you’ll spend less time putting more profitability to your bottom line.

Request a Quote

Engine ModelCat® C27

Engine Power - Net SAE J1349/ISO 9249** - Forward602hp

Engine Power - Gross SAE J1995* - Forward631hp

Engine Power - Gross SAE J1995* - Reverse766hp

Engine Power - ISO 14396* - Forward620hp

Engine Power - ISO 14396* - Reverse754hp

Engine Power - Net SAE J1349/ISO 9249** - Reverse722hp

Displacement1648in³

Stroke6in

Bore5.4in

EmissionsU.S. EPA Tier 4 Final/EU Stage V

Note (1)*Excludes all fan losses.

Note (2)All Engine ratings apply at 1,800 rpm.

Note (3)Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).

Note (4)Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).

Note (5)**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

Operating Weight154888lb

Shipping Weight111739lb

Note (1)D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.

Note (2)D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.

Shoe TypeExtreme Service (ES)

Width - Shoe24in

Shoes/Side44

Grouser Height3.7in

Pitch10.2in

Ground Clearance28.5in

Track Gauge100.4in

Length - Track on Ground152.8in

Ground Contact Area7347in²

Track Rollers/Side8

Number of Carrier Rollers1 per side (optional)

ROPSRollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.

FOPSFalling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.

SoundOperator Sound Pressure Level (ISO 6396:2008): 78 db(A)

NoteThe measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and

Sound (1)Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)

Note (1)The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Note (2)The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.

Note (3)The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).

Steering TypeHydraulically Applied Multiple-Disc Steering Clutch

Brake TypeSpring Applied Multiple- Disc Brake

Brake Diameter15.4in

Brake Count10

Engine ModelCat® C27

Engine Power - Net SAE J1349/ISO 9249** - Forward603hp

Engine Power - Net SAE J1349/ISO 9249** - Reverse722hp

Engine Power - Gross SAE J1995* - Forward631hp

Engine Power - Gross SAE J1995* - Reverse766hp

Engine Power - ISO 14396* - Forward622hp

Engine Power - ISO 14396* - Reverse756hp

Displacement1648in³

Bore5.4in

Stroke6in

EmissionsU.S. EPA Tier 2 Equivalent

Note (1)*Excludes all fan losses.

Note (2)All Engine ratings apply at 1,800 rpm.

Note (3)Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).

Note (4)Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).

Note (5)**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

Fuel Tank - Usable Volume323.3gal (US)

Fuel Tank - Total Volume335.2gal (US)

Pump TypeVariable displacement piston

Pump Output - Implement112gal/min

Note (1)Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).

Fan Pump21.7gal/min

Note (2)Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).

Tilt Cylinder Flow - Rod End Flow112gal/min

Tilt Cylinder Flow - Head End Flow63.4gal/min

Lift Cylinder Relief Valve Setting4061.1psi

Tilt Cylinder Relief Valve Setting3872.5psi

Ripper - Lift - Relief Valve Setting4061.1psi

Ripper - Pitch - Relief Valve Setting4061.1psi

Tank Capacity32.2gal (US)

Cylinder Sizing - Blade Lift - Bore5.5in

Cylinder Sizing - Blade Tilt - Bore8.3in

Cylinder Sizing - Ripper Shank Lift - Bore8.3in

Cylinder Sizing - Ripper Shank Angle - Bore7.1in

Cylinder Sizing - Blade Lift - Stroke65.1in

Cylinder Sizing - Blade Tilt - Stroke9.5in

Cylinder Sizing - Ripper Shank Lift - Stroke21.1in

Cylinder Sizing - Ripper Shank Angle - Stroke26in

Note (3)Electro-hydraulic pilot valves assist operations of ripper and dozer controls.

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.

1.0 Forward2.5mile/h

1.5 Forward3.4mile/h

2.0 Forward4.5mile/h

2.5 Forward6mile/h

3.0 Forward7.8mile/h

1.0 Reverse3.2mile/h

1.5 Reverse4.2mile/h

2.0 Reverse5.6mile/h

2.5 Reverse7.5mile/h

3.0 Reverse9.8mile/h

Transmission Clutch Diameter17in

TypePlanetary powershift

10SU ABR - Capacity (SAE J1265)24.2yd³

10SU ABR - Width (over end bits)194.5in

10SU ABR - Height83.5in

10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)19.98in

10SU ABR - Digging Depth - Blade Pitch: Nominal25.23in

10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)30.08in³

10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)66.14in

10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)53.86in

10SU ABR - Ground Clearance - Maximum Tilt LH56.3in

10SU ABR - Ground Clearance - Maximum Tilt RH56.3in

10U ABR - Capacity (SAE J1265)28.7yd³

10U ABR - Width (over end bits)207.1in

10U ABR - Height83.5in

10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)19.98in

10U ABR - Digging Depth - Blade Pitch: Nominal60in

10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)30.1in

10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)66.1in

10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)53.9in

10U ABR - Ground Clearance - Maximum Tilt LH60.8in

10U ABR - Ground Clearance - Maximum Tilt RH60.8in

10U ABR - Weights - Blade Weight*23585lb

10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)154888lb

Note (1)Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees

Note (2)*Does not include hydraulic controls but includes blade cylinders, pusharms.

Note (3)**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.

Maximum penetration force * (shank vertical)49233lbf

Maximum penetration depth (standard tip)59.2in

Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole36in

Weight14209lb

NoteWeight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

Maximum penetration force * (shank vertical)53055lbf

Maximum penetration depth (standard tip)78.3in

Weight14548lb

NoteWeight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

Ground Clearance*28.5in

Track Gauge100.4in

Width - Without Trunnions - 610 mm/24 in ES130.4in

Width - Over Trunnions148in

Height - FOPS Cab*162.8in

Height - Top of Stack*171.5in

Height - ROPS/Canopy*173.5in

Note (1)*Includes grouser height for total dimensions on hard surfaces.

Length - Track on Ground152.8in

Overall Length - Basic Tractor209.6in

Length - With SU-Blade292in

Length - With U-Blade305.1in

Length - With Single-Shank Ripper278.8in

Length - With Multi-Shank Ripper285.1in

Overall Length - SU-Blade/SS Ripper360.6in

Cooling System Refill – Tier 4 Final Engine46.2gal (US)

Engine Crankcase Sump27.2gal (US)

Power Train - Total Volume81.4gal (US)

Power Train - Refill Volume74.8gal (US)

Final Drives (each)12.2gal (US)

Track Roller Frames (each)16.9gal (US)

Pivot Shaft Oil9.5gal (US)

Hydraulic System Tank32.2gal (US)

Standard

Air Conditioner and Heater with Automatic Climate Control

Seat — Cloth with Air Suspension

Cab Glass — Single-Pane Tinted Safety

Rollover Protection System (ROPS)/Falling Object Protection (FOPS), Sound-Suppressed Cab

High-Definition Primary Touchscreen Display

Cab Access – Blade Push Arm Steps and Grab Handle

Visibility – Rearview Mirror

Optional

Cab Glass – Dual-Pane Laminated Impact Safety

Visibility – Five Cameras: 360-Degree View and Ripper Camera

Cab Glass – High-Pressure Safety (40 psi/275 kPa)

MineStar Terrain Display

Seat – Heated, Cooled, Adjustable Lumbar and Bolsters

Visibility – Dual Camera: Backup and Ripper

Standard

VIMS

Cat Product Link Elite (cellular)

Automated Blade Assist (ABA)

Optional

Autocarry

Auto Ripper Control

Cat Product Link Elite Dual Mode (cellular + satellite)

Cat Grade with 3D Blade Control

MineStar Terrain Ready

MineStar Terrain with Blade Control

MineStar Command Remote Control Ready

Standard

Stator Clutch Torque Divider – Electronic Control

Powershift Transmission – Three-Speed Electronic Shift

High-Performance Single-Plane Cooling Package with Aluminum Radiator

Cat C27 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent

Optional

Hydraulic Cooling Fan – Automatic Reversing

Standard

Lifetime-Lubricated Rollers and Idlers

Suspension-Type Undercarriage

Track Shoe (ES): 610/710/785 mm (24, 28, 31 inch) Width

Optional

Abrasion Rollers and Idlers

Cold Weather Rollers and Idlers

Carrier Roller

Track Links – Heavy Duty XL – Duralink

Track Shoe – Anti-Packing Round Hole

Sound-Suppression Undercarriage

Track Shoes : 610/710/786 mm (24/28/31 in) Width (various configurations)

Standard

Electronically Controlled, Load-Sensing Dozer Lift and Tilt

Electronically Enabled Blade – Quick Drop

Electronically Controlled, Load-Sensing Ripper Lift and Pitch

Dozer Blade – Dual Tilt, Guarded Lines

Optional

Ripper Pin Puller

Standard

24V Electric Start

Batteries – 2× 200-Amp Hour, 12V

Battery Isolation - Single Pole

Lights – LED – 13 Positions

Optional

Lights – LED – Premium Package

Battery Isolation – Dual Pole

Standard

Replaceable Bearings – Push Arm and Ripper

Radiator Guard – Swing-Out Access Doors

Ground-Level Fast Fuel Fill

Ground-Level Electrical Service Station

Diagnostic Connector

Bottom Guards - Hinged with Release Catch

Scheduled Oil Sampling (S·O·S) Fluid Sampling Ports

Ecology Fluid Drains – All Compartments

Optional

Ripper Lubrication – Grouped – Ground-Level Fill

Ground-Level – Fluid Fill and Drain Engine, Power Train, Hydraulic and Coolant

Sound Reduction Sealed Bottom Guards

Ripper Lubrication – Autolube with Ground-Level Fill

Optional

Counterweight – Rear, 3 Weighted Plates

No Rear Attachment for customers who already have a rear attachment

Ripper – Single Shank with Pin Puller and Retrieval Hitch

Ripper – Single Shank with Pin Puller

Ripper – Multi Shank (three shank)

Counterweight – Rear, 4 Weighted Plates

Ripper – Multi Shank Deep with Pin Puller

Optional

Semi-Universal (18.5 m3/24.2 yd3)

Universal (22 m3/28.7 yd3)

Optional

Fire Suppression Ready

Fire Suppression Installed

Optional

Cushion Dozer Blade

Coal Universal (52 m3/68 yd3)

Black Blade Paint

Abrasion Liners and Guards

Woodchip Universal (72.6 m3/95 yd3)

Reclaimation Universal (24.5 m3/32 yd3)

Coal Universal (46.1 m3/60.3 yd3)

Coming Soon

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.