Photovoltaic Module PVC

ApplicationCompatible with 1000V and 1500V plant architectures

Module TypeMono crystalline halfcut PERC

Nominal Power350W to 550W per panel

Standard

Produces more than 97.5% power in the first year and after 25 years 85.5%.

Standard

2000 hrs damp heat testing is twice the standard testing hrs. required

600 thermal cycling testing is three times the standard cycles required.

192 hrs of PID (potential-induced degradation) at 85°C/85RH) is twice the standard testing hrs. required.

Mechanical Load testing for Dynamic + Thermal Cycle + Humidity Freeze result in much less cell breakage and power loss than static testing alone.

60-100 kWh/m2 LID (light-induced- degradation) validates early hour performance.

LeTID (light and elevated temperature degradation) is a proprietary validation for long term PERC performance.

Validated for use in harsh environment by IEC testing for salt mist, amonia, dust and sand.