Cat?� C15 Industrial Power Unit

Cat?� C15 Industrial Power Unit

The Cat?� C15 Industrial Power Unit is offered in ratings ranging from 354-433 kW (475-580 hp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat?� Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Request a Quote

Maximum Power580hp

Maximum Torque1958lb-ft @ 1400 rpm

Rated Speed1800-2100 rpm

Minimum Power475hp

EmissionsU.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Stage V, China Nonroad IV

Engine ConfigurationInline 6, 4-Stroke-Cycle Diesel

Bore5.4in

Stroke6.7in

Displacement927.6in³

Compression Ratio17.0:1

AspirationTurbocharged Aftercooled (TA)

Rotation from Flywheel EndCounterclockwise

AftertreatmentDOC+DPF+SCR

Length98in

Width48.4in

Height79in

Weight5842lb

Width43.8in

Height25.8in

Weight591lb

Diameter14in

Length33.6in

Width11.3in

Height21.7in

Weight42.8lb

Volume Capacity51.1qt (US)

Standard

Turbocharged

Air-to-Air Aftercooled

Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) Korea Stage V, China Nonroad IV

Standard

Electronic control system

Over-foam wiring harness

Automatic altitude compensation

Power compensated for fuel temperature

Configurable software features

Engine monitoring system SAE J1939 broadcast and control

Integrated Electronic Control Unit (ECU)

Remote fan control

Standard

Thermostats and housing, vertical outlet

Centrifugal water pump

Guidance on cooling system design available through your dealer to ensure equipment reliability

Standard

Choice of SAE No. 0 or SAE No. 1 flywheel housing

Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Stage V, China Nonroad IV).

Standard

MEUI injection

Primary fuel filter

Secondary fuel filters

Fuel transfer pump

Electronic fuel priming

Standard

Open crankcase ventilation system

Oil cooler

Oil filler

Lube oil filter

Oil dipstick

Gear driven oil pump

Choice of front, rear or center sumps

Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Stage V, China Nonroad IV)

Standard

SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

Standard

Paint: Caterpillar yellow, with optional colors available at request

Standard

Cat Regeneration System

Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)

NOx Reduction System (NRS)

Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet

Available in 12 volt or 24 volt systems

Standard

Cat Regeneration System

Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)

Aftertreatment Electronic Control Unit (ECU)

NOx Reduction System (NRS)

Pump Electronic Control Unit (PETU)

Selective Catalytic Reduction (SCR)

Available in 12V or 24V systems

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.