Nominal Rated Payload256ton (US)
Rated Gross Machine Weight851000lb
Chassis Weight265639lb
Body Weight67682lb
Note (1)Consult your tire manufacturer for maximum tire load
Note (2)Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.
Gross Power - SAE J19952650hp
Net Power - SAE J13492478hp
Engine ModelCat® C175-16
Rated Speed1750r/min
EmissionsFuel Optimized
Bore6.9in
Stroke8.7in
Displacement5187in³
Note (1)Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)EPA Tier 4 Final / EU Stage V available for applicable markets.
TypeTwin, two-stage hydraulic cylinders with snubbing valve
Pump Flow - High Idle224gal/min
Relief Valve Setting - Raise2955psi
Body Raise Time - High Idle19s
Body Lower Time - Float20s
Body Power Down - High Idle17.5s
Air ConditioningAir Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr
Heater / Defroster38900Btu/h
NoteAmbient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
ROPS Standards (1)The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396.
ROPS Standards (2)ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria.
FOPS StandardsFOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria.
Fuel Tank750gal (US)
Fuel Tank - Optional1300gal (US)
Diesel Exhaust Fluid Tank62gal (US)
Cooling System284gal (US)
Crankcase82gal (US)
Rear Axle - Housing260gal (US)
Steering System - Including Tank77gal (US)
Brake Hoist System - Includes Tank347gal (US)
Torque Converter - Transmission Sump27gal (US)
Torque Converter/Transmission System - Including Sump55gal (US)
Note (1)DEF Tank only available for EPA Tier 4 engine option.
Struck112.6-151 m³ (147-197.5 yd³)
Heaped (SAE 2:1)*162-191 m³ (212-250 yd³)
Note (1)Contact your local Cat dealer for body recommendation.
Note (2)*ISO 6483:1980
Standard Tires40.00 R57
Rims29" or 32"
NoteQuick Change Rims optional.
Note (1)Extended life wheel stations optional.
Note (2)Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
TypeSelf-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front5.1in
Effective Cylinder Stroke - Rear4.2in
Rear axle - Oscillation±4.9 degrees
Service BrakesFour-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area13921in³
Rear - Wet Disc Brake Surface Area20847in³
Standards(Service and Secondary): ISO 3450:1996
Parking BrakesFour-corner, Multi-disc, Spring Applied, Hydraulically Released
Load BrakeRear service brakes
NoteAnti-Lock Brake System (ABS) optional with CMD package
Front Axle - Empty48%
Rear Axle - Empty52%
Front Axle - Loaded33%
Rear Axle - Loaded67%
Forward - 18mile/h
Forward - 210.8mile/h
Forward - 314.8mile/h
Forward - 419.9mile/h
Forward - 527.1mile/h
Forward - 637.3mile/h
Reverse7.3mile/h
Top Speed - Loaded37.3mile/h
Differential Ratio1.8:1
Planetary Ratio16:01
Total Reduction Ratio26.8:1
Brake Surface - Front13921in²
Brake Surface - Rear20847in²
StandardsJ-ISO 3450 JAN88, ISO 3450:1996
Struck112-142 m³ (146-186 yd³)
Heaped (SAE 2:1)159-190 m3 (209-250 yd3)
NoteContact your local Cat dealer for body recommendation.
ROPS StandardsROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria.
FOPS StandardsFOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.
Sound StandardsThe operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
Sound Standards (1)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Steer Angle36°
Turning Diameter - Front93.2ft
Steering StandardsSAE J15111 OCT90, ISO 5010:1992