Join the Blanchard Team..
Apply Now
The Cat?� C27 Industrial Power Unit is offered in ratings ranging from 597-783 bkW (800-1050 bhp)@ 1800 rpm. Conveniently pre-configured for a wide range of applications, the Cat?� Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Request a QuoteMaximum Power950hp
Maximum Torque3211lb-ft @ 1200 rpm
Rated Speed1800 rpm
Minimum Power800hp
EmissionsU.S. EPA Tier 4 Final, EU Stage V
Engine ConfigurationV-12, 4-Stroke-Cycle Diesel
Bore5.7in
Stroke6in
Displacement1649.5in³
Compression Ratio16.0:1
AspirationTwin Turbocharged-Aftercooled (TTA)
Rotation from Flywheel EndCounterclockwise
AftertreatmentDOC
Standard
Turbocharged
Air-to-Air Aftercooled
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
Standard
Electronic control system
Over-foam wiring harness
Automatic altitude compensation
Power compensated for fuel temperature
Remote fan control
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Integrated Electronic Control Unit (ECU)
Standard
Thermostats and housing, vertical outlet
Centrifugal water pump
Guidance on cooling system design available through your dealer to ensure equipment reliability
Standard
Choice of SAE No. 0 or SAE No. 1 flywheel housing
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
Standard
MEUI injection
Primary fuel filter
Secondary fuel filters
Fuel transfer pump
Electronic fuel priming
Standard
Open crankcase ventilation system
Oil cooler
Oil filler
Lube oil filter
Oil dipstick
Gear driven oil pump
Choice of front, rear or center sumps
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
Standard
SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
Standard
Paint: Caterpillar yellow, with optional colors available at request
Standard
Cat Regeneration System
Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Aftertreatment Electronic Control Unit (ECU)
NOx Reduction System (NRS)
Pump Electronic Control Unit (PETU)
Selective Catalytic Reduction (SCR)
Available in 12V or 24V systems
Complete this form to get a quote on the equipment you are interested in.
