740 EJ Articulated Truck

Engine ModelCat® C18

Bore5.7in

Stroke7.2in

Displacement1106in³

Peak Engine Torque Net (SAE J1349)1887ft·lbf

No Engine De-rating Required Below10000ft

Note (4)DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Peak Engine Torque Gross (SAE J1995)1931ft·lbf

Note (1)The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.

Peak Engine Torque Speed1200r/min

Note (2)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

Note (3)Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.

EmissionsThe 740 EJ meets Tier 4 Final and Stage V emission standards.

Net Power - SAE J1349496HP

Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 FinalCat C18

Gross Power - SAE J1995511HP

Rated Payload42ton (US)

Heaped (SAE 2:1)30.1yd³

Struck23.5yd³

Forward - 13.8mile/h

Forward - 25mile/h

Forward - 37mile/h

Forward - 48.8mile/h

Forward - 511.6mile/h

Forward - 614.2mile/h

Forward - 719.6mile/h

Forward - 823.5mile/h

Reverse - 14mile/h

Reverse - 29.1mile/h

Forward - 934mile/h

Fuel Tank145.3gal (US)

Cooling System23.7gal (US)

Engine Crankcase13.7gal (US)

Steering/Hoist Hydraulic System36.9gal (US)

Transmission - OTG19.8gal (US)

DEF Tank5.3gal (US)

Axles - Each15.8gal (US)

Final Drive - Each1.3gal (US)

Brake Cooling Tank17.7gal (US)

Interior Cab72dB(A)

Note (1)The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the

Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

BrakesISO 3450 – 2011

Cab - FOPSISO 3449 Level II – 2005

Cab - ROPSISO 3471 – 2008

SteeringISO 5010 – 2007

Center Axle - Empty17095lb

Total - Empty78623lb

Rear Axle - Rated Load40120lb

Rear Axle - Empty16515lb

Front Axle - Rated Load3534lb

Center Axle - Rated Load40120lb

Total - Loaded162399lb

Total - Rated Load83776lb

Rear Axle - Loaded56637lb

Front Axle - Empty44849lb

Front Axle - Loaded48548lb

Center Axle - Loaded57214lb

TypeHigh Strength Brinell HB450 Wear Resistant Steel

Chute0.55in

Front0.28in

Side0.43in

Base0.55in

Lock to Lock4.8 seconds @ 60 rpm

NoteDimensions are for machines equipped with 29.5R25 tires.

Turning Dimensions - Aisle Width233in

Turning Dimensions - Inside Radius173in

Turning Dimensions - Clearance Radius356in

Turning Dimensions - SAE Turning Radius339in

Turning Dimensions - Steer Angle - Left/Right45 deg

Retract (manual)21s

Eject (manual)17s

Eject (automatic)16s

Retract (automatic)21s

NoteAn optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

Wheel Loader: 972 - Passes4–5

Wheel Loader: 982 - Passes4

Hydraulic Excavator: 374 - Passes5

Hydraulic Excavator: 390 - Passes4

Wheel Loader: 980 - Passes4–5

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Air conditioning with R134A refrigerant

Windshield wiper and washer, two speed, intermittent (front)

Windows opening side, tinted

Adjustable air vents

Two seat belts, operator's retractable

Windshield wiper and washer, two speed (rear)

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind seat storage
– Coat hook

Mirrors: Extensive arrangement for improved visibility

Tilt and telescopic steering wheel

Sun visor

Heater and defroster with variable speed fan

Secondary steering – electro hydraulic

Combined gear selection and eject control lever

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure
– Seat belt warning
– Secondary steering failure
– DPF regeneration filter
– Machine Security System (MSS)
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Window blinds

Glass windows: laminated and tinted-front toughened and tinted-sides and rear

Touch screen display incorporating the rearview camera video feed

Seats:
– Fully adjustable, air suspension, heated/cooled
– Padded trainer with lap belt

Standard

Product Link: PL631 (satellite) or PL641 (cellular) dependent on location and licensing agreement

Cat Detect with Stability Assist

Standard

Batteries (two) maintenance free

Electrical system: 24 volt, 5A 24- to 12-volt converter

Horn

Lighting Systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light
– Two stop/tail lights
– Front and rear direction indicators

Main disconnect switch

Remote starting receptacle (cables not included)

Standard

Auto shift nine-speed forward and two reverse transmission

Cat C18 engine

Differentials: standard with automatic clutched inter and cross-axle differential locks

Dual circuit oil immersed, enclosed brakes – all wheels

Retarder: engine compression brake

Three axle, six-wheel drive

Standard

Reverse alarm

Rearview camera

ROPS/FOPS cab

Standard

Rear window

Radiator

Crankcase

Axle

Front dump body spill guard, integral part of fabricated body

Standard

Mud flaps: wheel arch and body mounted with transportation tiebacks

S·O·S sampling valves

Tires, six 29.5R25, radial

Vandalism protection: lockable caps for fuel tank and hydraulic oil tank

Optional

Auto lube installation for automatic greasing of bearings

Body liners

Bluetooth radio stereo system

Cat Production Measurement payload monitoring system

Cold weather coolant –51° C (–60° F)

Cold weather start attachment

Engine block heater

Ether start

Exhaust heated body

Fast fuel fill

Fender extension

Flashing LED beacon

Four point seat belt

Fuel additive – anti-waxing

Heated rearview motorized mirrors

Machine Security System (MSS)

Product Link Elite: PLE631 (satellite), PLE641 (cellular)

Roof mounted High Intensity Discharge (HID) work lights

Sound suppression

875/65 R29 wide tires