FM568 GF/FM568 LL

FM568 GF/FM568 LL

The Cat® FM568 is the ultimate forestry & shovel logging weapon. With incredible swing torque, track power, lift, and stability, you can reliably produce more loads daily and increase production and profit while counting on outstanding service and support for your business.

Request a Quote

Engine ModelCat C9.3B

Net Power - ISO 9249346hp

Engine Power - ISO 14396347hp

Net Power - ISO 9249 (DIN)351hp (metric)

Engine Power - ISO 14396 (DIN)352hp (metric)

Bore4.53in

Stroke5.87in

Displacement567.5r/min

Biodiesel CapabilityUp to B20¹

EmissionsMeets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time

Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Maximum Travel Speed2.7mile/h

Maximum Drawbar Pull84978lbf

Main System - Maximum Flow153gal/min

Maximum Pressure - Equipment5076psi

Maximum Pressure - Equipment - Lift Mode5511psi

Maximum Pressure - Travel5076psi

Maximum Pressure - Swing4119psi

Swing Speed6.1r/min

Maximum Swing Torque120222lb/ft

General Forestry106920lb

Log Loader (U/U)108690lb

Fuel Tank262gal (US)

Cooling System5gal (US)

Engine Oil8gal (US)

Swing Drive3gal (US)

Final Drive - Each3gal (US)

Hydraulic System - Including Tank101gal (US)

Hydraulic Tank49gal (US)

DEF Tank21gal (US)

Max Reach at Stick Nose at Ground Level - General Forestry Road Builder460in

Max Reach at Grapple Mount on Heel at Ground Level - Log Loader Under/Under509in

Note (1)General Forestry

Shipping Height - Tilted Cab159in

Handrail Height138in

Length: General Forestry - Boom Stretched Out607in

Length: Log Loader - Boom Stretched Out667in

Tail Swing Radius149in

Counterweight Clearance59in

Ground Clearance30in

Track Length216in

Track Length to Center of Rollers175in

Track Gauge115in

Transport Width144in

Note (1)The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.1 (22"/48" Riser CAB)/2.2 (72" Riser CAB) kg of refrigerant, which as a CO2 equivalent of 3.003/

Standard

ROPS Forestry cab with polycarbonate windows

4-point harness seat belt

Heated and cooled seat with air-adjustable suspension

Integrated joysticks

Tilt-up left-side console (side-entry cab only)

High-resolution touchscreen monitor

Bluetooth integrated radio (including USB, aux port and microphone)

12V DC outlets

Keyless push-to-start engine control

Automatic bi-level air conditioner

LED dome and floor lights

Windshield wiper and washer

Behind seat storage

Retractable sunshade

Optional

Rear entry

Side entry

559 mm (22") tilting riser

1219 mm (48") tilting riser

1829 mm (72") tilting riser

CB radio mounts

Cat Stick Steer

Auxiliary relay

Standard

VisionLink

Remote Services Capability

Standard

Maintenance-free 1000 CCA batteries (x4)

Centralized electrical disconnect switch

LED chassis, boom (GF), stick (LL) and cab lights

115 Amp. alternator

24-volt electric starting

Horn and travel alarm

Pre-start monitoring system

Tool control software

Secondary engine shut off switch

Optional

Premium lighting - General Forestry - 6 additional LED lights - 14 total

Premium lighting - Log Loader - 10 additional LED lights - 18 total

Standard

Electric fuel priming pump

Three selectable modes: Power, Smart, Eco

Automatic engine speed control

Automatic engine idle shutdown

Up to 4500m (14,764 ft) altitude capability

52° C (126° F) high-ambient cooling capacity

-32° C (-25° F) cold start capability

Hydraulic reverse fan

Two-stage fuel filter system

Double element air filter with integrated pre-cleaner

Optional

Cold start package with block heater and ether assist

Standard

Boom and stick regeneration circuits

Boom and stick drift reduction valve

Electronic main control valve

Automatic hydraulic oil warmup

Automatic swing parking brake

High performance hydraulic return filter

Automatic two speed travel

Bio hydraulic oil capability

High torque swing drive

Swing cushion valve

Tool control software

Optional

Medium pressure circuit

Standard

Caterpillar One Key security system

Lockable service doors

Lockable external tool/storage box

Lockable fuel caps and hydraulic tank

Service platforms with anti-skid plate and countersunk bolts

Right-hand handrail and handhold

Signaling/warning horn

Travel alarm

Ground-level secondary engine shutoff switch

Rearview camera

Optional

Easy lock cab tilting system

Cab riser light

Inspection lighting

Swing alarm

Right-hand-sideview camera

Standard

Integrated vehicle health management system

Side-entry service platform

Left/Right-side fuel fill locations

Grouped location for engine oil and fuel filters

Scheduled Oil Sampling (S·O·S) ports

Standard

High Wide undercarriage

Grease lubricated track with positive pin retention

Catwalks

Tie down points

Counterweight fuel tank

Heavy-duty track rollers

Heavy-duty travel motor guards

Heavy-duty bottom guards

Track guiding guards

High drawbar final drives

Heavy-duty recoil springs

Heavy-duty hydraulic swivel

Heavy-duty hydraulic swivel guard

Optional

700 mm (28") double and single grouser shoes

850 mm (33") triple grouser shoes

Optional

6.5 m (21'4") Reach boom - General Forestry

7.09 m (23'3") Straight boom - Log Loader

3.9 m (12'10") Reach stick

4.73 m (15'6") Over/Under stick

4.73 m (15'6") Power Clam stick

DB family bucket linkage

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.