6060 Hydraulic Mining Shovel

6060 Hydraulic Mining Shovel

The Cat® 6060 Hydraulic Mining Shovel is the industry’s most popular hydraulic shovel in its size class. And for good reason. With its rated payload of 61 tonnes (67 tons), the Cat 6060 was the first shovel in the mining industry tailor-made for mines using 240-ton (218-tonne) haul trucks, providing an efficient truck-shovel system solution to meet production capacity in these environments. Today’s 6060 remains the ideal shovel for these applications, with improvements and enhancements in durability and reliability to deliver the uptime you demand. And its powerful engine and efficient hydraulic system allow higher working speeds for fast cycle times. The result is higher productivity and lower overall owning and operating costs.

Request a Quote

Engine Output - SAE J19953015hp

Bucket Payload67ton (US)

Operating Weight660ton (US)

NoteSpecifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.

Engine Model2 x Cat 3512E

Rated Speed1,800 min-1 (1,800 rpm)

Number of Cylinders - Each Engine12

Bore6.69in

Stroke8.46in

Displacement3574in³

AspirationTurbocharged and charge air-cooled

Components (1)Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)

Components (2)High-capacity water separator

Components (3)Two-stage fuel filter with series filtration

Components (4)Heavy-duty air filters

Components (5)Microprocessed engine management

Components (6)Hydraulically driven radiator fan with electronically controlled fan speed

Components (7)Exhaust manifold and turbo heat shields

Gross Power - SAE J19953025hp

Net Power - ISO 92492990hp

Net Power - SAE J13492821hp

EmissionsOptimized for fuel consumption.

Gross Power - SAE J19953015hp

Net Power - SAE J13492810hp

Net Power - ISO 92492979hp

EmissionsMeets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.

System Voltage24 V

Batteries in Series/Parallel Installation6 x 210 Ah; 12 V each; 630 Ah 24 V in total

Components (1)6 maintenance-free batteries

Components (2)Lockable battery isolator switch

Components (3)Lockable starter isolator switch

Components (4)13 LED high-brightness working flood lights

Components (5)17 LED service lights

Components (6)2 electric horns (1 cab module; 1 oil cooler module)

6060 FS - Standard Track Pads4.58ft

6060 FS - Operating Weight1320110lb

6060 FS - Ground Pressure26.6 N/cm2 (38.5 psi)

Backhoe - Standard Track Pads4.58ft

Backhoe - Operating Weight1323860lb

Backhoe - Ground Pressure26.7 N/cm2 (38.7 psi)

NoteOperating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.

Fuel Tank3136gal (US)

Hydraulic Tank1876gal (US)

Hydraulic System - Including Tank2483gal (US)

Engine Oil86.6gal (US)

Cooling System211.4gal (US)

Swing Drive42.4gal (US)

Grease Tank188gal (US)

Main Pumps - Diesel Version8 variable swash plate pumps

Main Pumps - Maximum Oil Flow - Diesel Version8 x 650 L/min (8 x 172 gal/min)

Maximum Pressure - Attachment4640psi

Maximum Pressure - Travel5220psi

Swing Pumps - Diesel Version4 reversible swash plate pumps

Swing Pumps - Maximum Oil Flow - Diesel Version4 x 352 L/min (4 x 93 gal/min)

Maximum Pressure - Swing Pumps5075psi

Oil Flow of Cooling Pumps4 x 488 L/min (4 x 129 gal/min)

Components4 cooling fans

Diameter - Fan46in

Features (1)Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running

Features (2)Fan speed and flow of oil to the coolers are thermostatically controlled

Features (3)Extremely high cooling efficiency to ensure optimum oil temperature

Features (4)Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers

Swing Drive4 compact planetary transmissions with axial piston motors

Parking BrakesWet multiple disc brake, spring loaded/hydraulically released

Maximum Swing Speed3.8r/min

Swing RingTriple-race roller bearing with sealed internal gearing

Features (1)Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody

Features (2)Closed-loop swing circuit with torque control

Features (3)Hydraulic braking of the swing motion by counteracting control

Features (4)All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system

Travel Speed - 1st Stage - Maximum0.68mile/h

Travel Speed - 2nd Stage - Maximum0.99mile/h

Maximum Tractive Force661160lb

Gradeability - Travel Drives - Maximum39%

Track Pads - Each Side42

Bottom Rollers - Each Side7

Support Rollers - Each Side2 plus a skid plate in between

Travel Drives - Each Side1 planetary transmission with 2 two-stage axial piston motors

Components (1)HD tracks with cast double-grouser track pad

Components (2)HD fixed axle rollers and idlers

Components (3)Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas

Components (4)Acoustic travel alarm (forward and reverse)

Components (5)Fully hydraulic, self-adjusting track tensioning system with piston accumulator

Components (6)Automatic hydraulic retarder valve to prevent over-speed on downhill travel

Operator's Eye Level - Approximately24.91ft

Internal Dimensions of Cab - Length7.33ft

Internal Dimensions of Cab - Width5.33ft

Internal Dimensions of Cab - Height6.75ft

Components (1)Single hydraulically driven HVAC System, with dual system option

Components (2)In-floor window with removable grate

Components (3)Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support

Components (4)Independently adjustable seat consoles with integrated joysticks

Components (5)Operator Protective Guard (Top Guard) (ISO 10262:1998)

Components (6)Elevated full-size trainer seat with safety belt and laptop desk

Components (7)Additional fold-away auxiliary seat with safety belt

Components (8)Operator Presence switch

Components (9)Monitoring system with 254 mm (10 in) touch screen

Components (10)Powered 45 degree access stairway

Components (11)Emergency egress ladder

Components (12)FM/AM radio with USB and AUX input

Components (13)Roller blinds on 3 front windows

Components (14)3 cup holders

Components (15)Cat Electronic Technician service port

Capacity - Grease Container188gal (US)

Type (1)Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times

Type (2)System failures displayed by monitoring system

Type (3)Grease filters (200 µm) between service station and container as well as directly behind grease pump

Type (4)Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring

Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces

Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance

Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)Constant boom momentum throughout the entire lift arc; Crowd force assistance

All buckets (FS and BH) are equipped with a wear package consisting of: (1)Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth

All buckets (FS and BH) are equipped with a wear package consisting of: (2)Wing shrouds on side walls and heel shrouds at bottom edges

Type (1)Catwalks with rails at booms (FS and BH)

Type (2)Guards for shovel cylinders (FS)

Type (3)Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve

Type (4)Service access holes from both sides of boom (FS and BH) and stick (FS)

Type (5)Welding procedures allow for internal counter-welding (double prep weld) wherever possible

Type (6)Booms and sticks are stress-relieved after welding

Type (7)Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas

Type (8)Special wear packages for highly abrasive materials available upon request

Maximum Crowd Force494410lb

Maximum Breakout Force388780lb

Maximum Digging Height51.17ft

Maximum Digging Reach54.17ft

Maximum Digging Depth9.17ft

Face Shovel (heaped 2:1)44.5yd³

Backhoe (heaped 1:1)44.5yd³

Stick Digging Force - ISO295740lb

Bucket Digging Force - ISO274840lb

Maximum Digging Height52.83ft

Maximum Digging Reach62.33ft

Maximum Digging Depth29.17ft

InstallationRetractable service station installed underneath the engine module and easily accessible from ground.

Equipped With (1)Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container

Equipped With (2)Cat jump-start socket

Equipped With (3)Indicator lights

Standard

Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Standard

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Standard

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms -forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Standard

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Standard

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Standard

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Standard

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Standard

Cat Product Link Elite (Cellular)

Cat MineStar Solutions Ready

Standard

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval -10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Standard

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Standard

ISO or ANSI decals

Optional

Custom paint

Optional

Oil change interval extension for engine oil up to 500 hours, with optional extension to 1,000 hours

Rectangular grease container, 710 L (188 gal), filled via service station

Various cold-weather options for temperatures below -10°; 400 V, 50 Hz and 208 V, 60 Hz

Optional

Dual hydraulically driven HVAC system for redundancy

Cab heating

Camera monitoring system with two cameras, two lights, and additional display

Optional

Track pad width 1400 mm (4 ft 7 in)

Belly plate for undercarriage protection

Additional optional equipment available on request.

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.