Net Power - ISO 9249/SAE J1349130hp
Torque Rise - ISO 929442%
Note (2)Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Displacement427.8in³
Derating Altitude9842.5ft
Maximum Torque - ISO 9249606lb/ft
Net Power Range (Tier 3)130hp
Note (3)Power as declared per ISO 14396
Bore4.1in
Engine RPM2,000
Maximum Torque - AWD On611lb/ft
Note (1)Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
Engine ModelCat 7.1
Stroke5.3in
EmissionsU.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
Standard Capability122°F
Number of Cylinders6
Derating Altitude (AWD)5499ft
All-Wheel Drive Net Power Range (Tier 4)174kW
Operating Weight - Typically Equipped35067lb
Blade Width12ft
Cutting Edge6in
Blade Height24in
Throat Clearance4.1in
End Bit6in
Arc Radius16.3in
Circle Center Shift Right26in
Blade Tip Range Forward40
Maximum Shoulder Reach Right76in
Moldboard Side Shift Right26.1in
Maximum Shoulder Reach Left69.4in
Maximum Depth of Cut30.5in
Moldboard Side Shift Left20.1in
Circle Center Shift Left26in
Blade Tip Range Backward5
Maximum Lift Above Ground16.1in
Transmission and Differential9gal (US)
Circle Drive1.8gal (US)
Fuel Tank65gal (US)
Cooling System14gal (US)
Engine Crankcase4.8gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)5gal (US)
Hydraulic System25.6gal (US)
Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 436731lb
Note (1)*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
Joystick Weight* Tier 435358lb
Lever/Steering Wheel Weight* Tier 435067lb
Joystick All-Wheel Drive (AWD) Weight* Tier 436846lb
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con
Maximum Height136.4in
Length of Machine*387in
Width All Wheel Drive (AWD)2551mm
Width102in
Note*Typically equipped with push block and ripper.
Basic Blade Width12ft
