Base Power (1st Gear) - Net238hp
Engine ModelCat C13
Bore5.1in
Stroke6.2in
Speed at Rated Power1,850 rpm
Note (3)Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability122°F
Note (2)Optimized VHP Plus is standard for the 14M3.
Torque Rise41%
Maximum Altitude - Full Power13900ft
Maximum Torque - VHP Plus1137lb/ft
EmissionsTier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3)14349ft
Maximum Altitude - Full Power (Tier 2)12049ft
Note (1)Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum550 rpm
Note (4)Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Note (5)Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum1,600 rpm
Displacement763in³
Number of Cylinders6
Operating Weight - Typically Equipped57250lb
Gross Vehicle Weight - Base* - Total50980lb
Gross Vehicle Weight - Base* - Front Axle13994lb
Gross Vehicle Weight - Typically Equipped - Total57250lb
Gross Vehicle Weight - Typically Equipped - Rear Axle42005lb
Gross Vehicle Weight - Typically Equipped - Front Axle15245lb
Gross Vehicle Weight - Base* - Rear Axle36994lb
Note*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Blade Width14ft
Arc Radius16.3in
Throat Clearance4.6in
Blade Width - With End Bits169in
Blade Height - With Cutting Edge24.9in
Blade Width - Without End Bits164in
Blade Height - Without Cutting Edge23in
Maximum Depth of Cut23.3in
Circle Centershift - Left25.6in
Maximum Lift Above Ground16.5in
Circle Centershift - Right20.5in
Blade Tip Range - Backward5°
Maximum Shoulder Reach Outside of Tires - Right78.9in
Moldboard Sideshift - Right31.1in
Moldboard Sideshift - Left29.1in
Maximum Shoulder Reach Outside of Tires - Left73.6in
Blade Tip Range - Forward40°
Circle - Outer Diameter71.7in
Front Axle - Wheel Lean - Left/Right17.1°
Front Axle - Total Oscillation per Side32°
Transmission and Differential23.5gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)5.8gal (US)
Hydraulic System33gal (US)
Circle Drive1.8gal (US)
Cooling System15.9gal (US)
Fuel Tank109.9gal (US)
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).