14 Motor Grader

Base Power (1st Gear) - Net238HP

Engine ModelCat C13

Bore5.1in

Stroke6.2in

Speed at Rated Power1,850 rpm

Note (3)Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.

Standard Capability122°F

Note (2)Optimized VHP Plus is standard for the 14M3.

Torque Rise41%

Maximum Altitude - Full Power13900ft

Maximum Torque - VHP Plus1137lb/ft

EmissionsTier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent

Maximum Altitude - Full Power (Tier 3)14349ft

Maximum Altitude - Full Power (Tier 2)12049ft

Note (1)Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.

Standard - Fan Speed - Minimum550 rpm

Note (4)Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)

Note (5)Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Standard - Fan Speed - Maximum1,600 rpm

Displacement763in³

Number of Cylinders6

Operating Weight - Typically Equipped57250lb

Gross Vehicle Weight - Base* - Total50980lb

Gross Vehicle Weight - Base* - Front Axle13994lb

Gross Vehicle Weight - Typically Equipped - Total57250lb

Gross Vehicle Weight - Typically Equipped - Rear Axle42005lb

Gross Vehicle Weight - Typically Equipped - Front Axle15245lb

Gross Vehicle Weight - Base* - Rear Axle36994lb

Note*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

Blade Width14ft

Arc Radius16.3in

Throat Clearance4.6in

Blade Width - With End Bits169in

Blade Height - With Cutting Edge24.9in

Blade Width - Without End Bits164in

Blade Height - Without Cutting Edge23in

Maximum Depth of Cut23.3in

Circle Centershift - Left25.6in

Maximum Lift Above Ground16.5in

Circle Centershift - Right20.5in

Blade Tip Range - Backward5°

Maximum Shoulder Reach Outside of Tires - Right78.9in

Moldboard Sideshift - Right31.1in

Moldboard Sideshift - Left29.1in

Maximum Shoulder Reach Outside of Tires - Left73.6in

Blade Tip Range - Forward40°

Circle - Outer Diameter71.7in

Front Axle - Wheel Lean - Left/Right17.1°

Front Axle - Total Oscillation per Side32°

Transmission and Differential23.5gal (US)

Diesel Exhaust Fluid Tank (Tier 4 Only)5.8gal (US)

Hydraulic System33gal (US)

Circle Drive1.8gal (US)

Cooling System15.9gal (US)

Fuel Tank109.9gal (US)

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Joystick, power adjustable armrests

Air conditioner with heater

Centershift pin indicator

Coat hook

Cup holder

Display, digital speed and gear

Doors, left and right side with wiper

Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)

Gauges, machine level

Message display

Joystick gear selection

Joystick hydraulic controls for implements, steering, transmission

Ladders, cab, left and right side

Lights, left and right side lights

Lights, night time cab, LED

Meter, hour, digital

Mirror, inside rearview, wide angle

Power port, 12V

Radio ready, entertainment

ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)

Seat, mechanical suspension, cloth

Storage compartments

Throttle control, electronic

Optional

Air horn

Heated door

Mirrors high visibility

Mirrors, outside heated 24V

Mirrors, outside mounted

Seat, heated

Seat, heated/ventilated

Rearview camera

Seat belt indicator

Standard

Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector

Articulation, automatic Return-to-Center

Air-to-Air After Cooler (ATAAC)

Auto Diff Lock

Brake wear indication

Brakes, oil disc, four-wheel, hydraulic

Consistent power to ground

Monitoring system

Clutch, circle drive slip

Differential, lock/unlock*

Drain, engine oil, ecology

Demand fan, hydraulic

Engine ECO Mode

Ether starting aid

Fuel tank, ground level

Fuel-water separator

Hydraulic demand fan

Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)

Optimized VHP

Parking brake - multi disc, sealed, oil-cooled

Priming pump, fuel

Sediment drain, fuel tank

Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.

Transmission, 8F/6R, power shift, direct drive

Optional

Transmission, autoshift

Engine, compression brake

Standard

Alternator, 150 ampere, sealed

Batteries, maintenance free, HD, 1,125 CCA

Breaker panel

Electrical system, 24V*

Belt, serpentine, automatic tensioner

Lights: reversing (LED), roof-mounted roading, stop and tail (LED)

Product Link

Starter, electric

Service lights, enclosure, rear, LED

Optional

Light, LED, warning strobe

Lights, front headlights high

Lights, front headlights low

Mounting, for warning light

Working lights halogen

Working lights LED

Standard

Alarm, back up

Ground level engine shutdown

Hammer (emergency exit)

Horn, electric

Lockout, hydraulic implement for roading

Operator Not Present Monitoring system

Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders

Seat belt, retractable 76 mm (3 in)

Secondary steering

Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)

Optional

Additional rearview camera and monitor

Machine security system key

Optional

Cat GRADE with Cross Slope

Stable Blade

Advanced Control Joysticks

Auto Articulation

Optional

Debris guard

Front axle cylinder guards

Rear fenders

Sound suppression, engine enclosure and transmission

Transmission guard

Accumulators, blade lift

Fast fill fuel, 378.5 L/min (100 gal/min)

Metallic DCM wear strips

Optional

Moldboard, 4.9 m (16 ft)

Heater, engine coolant, 120V

Heater, engine coolant, 240V

Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6

Product Link satellite, cellular

Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)

Snow wing, mounting frame ready

Fast fill

Optional

4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )

Push block, counterweight

Ripper, rear

Tooth, ripper

Optional

Coolant, -51 degrees C (-60 degrees F)