Nominal Rated Payload410ton (US)
Rated Gross Machine Weight1375000lb
Chassis Weight453826lb
Body Weight Range38 833 - 43 275 kg (85,611 - 95,406 lb)
Note (1)Consult your tire manufacturer for maximum tire load.
Note (2)Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
Note (3)Body weight varies depending on how body is equipped.
Gross Power - SAE J19953500hp
Engine ModelCat® C175-16
Net Power - SAE J13493405hp
Optional Gross Power - SAE J19953100hp
Rated Speed1800r/min
Emissions RatingFuel Optimized
Bore6.9in
Stroke8.7in
Displacement5187in³
Note (1)Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Note (3)Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
Fuel Tank2000gal (US)
Cooling System273gal (US)
Crankcase124gal (US)
Hydraulic Tank273gal (US)
Hydraulic System (includes tank)342gal (US)
Fuel Tank1300gal (US)
Fuel Tank (Tier 4)1200gal (US)
Diesel Exhaust Fluid Tank100gal (US)
Cooling System211gal (US)
Crankcase82gal (US)
Final Drive - Each67gal (US)
Hydraulic System - Including Tank385gal (US)
Hydraulic Tank296gal (US)
Grease Tank90lb
Note (1)DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
Steer Angle39°
Turning Diameter - Front106.3ft
Steering StandardsISO 5010:2019
NoteTurning Diameter (ISO 7457:1997)
Total Reduction Ratio35:01:00
Top Speed - Loaded40mile/h
Generator/AlternatorBrushless, engine mounted, dual bearing
ControlsIGBT Inverter Technology, air cooled, pressurized cabinet with filtration
Wheel MotorCat high-torque AC induction, rear axle mounted
Cooling SystemCat variable speed, hydraulically driven cooling system
Service BrakesFour-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area22642in²
Rear - Wet Disc Brake Surface Area32730in²
StandardsService and Secondary: ISO 3450:2011
Electric RetardingRadial Grid Design
Dynamic Retarding Power - Continuous5480hp
Parking BrakesFour-corner, Multi-disc, Spring Applied, Hydraulically Released
Load BrakeRear service brakes
NoteAnti-Lock Brake System (ABS) optional with CMD package
Front Axle - Empty47%
Rear Axle - Empty53%
Front Axle - Loaded33%
Rear Axle - Loaded67%
NoteWeight distributions optimized with Cat body.
Struck129-200 m³ (168-261 yd³)
Heaped (SAE 2:1)218-276 m³ (285-361 yd³)
NoteContact your local Cat dealer for body recommendations.
TypeTwin, two-stage hydraulic cylinders with snubbing valve.
Pump Flow - High Idle257.3gal/min
Relief Valve Setting - Raise3029psi
Body Raise Time - High Idle21s
Body Lower Time - Float22s
Body Power Down- High Idle17.5s
Note (1)Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
Note (2)Power raise in both stages; power down capability in both stages.
Note (3)Automatic body-lower modulation reduces impact on frame.
TypeSelf-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front10in
Effective Cylinder Stroke - Rear5in
Air ConditioningHFC - 134A refrigerant: 21,600 Btu/h
Heater / Defroster24600Btu/h
NoteAmbient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
ROPS Standards (1)ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
FOPS StandardsFOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
Engine ModelCat® C175-20
Gross Power SAE J1995:20144150hp
Net Power - SAE J1349:20114000hp
Rated Speed1750r/min
Emissions RatingFuel Optimized
Bore6.9in
Stroke8.7in
Displacement6469in³
Note 1Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note 2Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp
Rims44" x 63" Rims
Standard Tires59/80 R63
Note (1)Quick Change Rims optional.
Note (2)Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Height - Top of ROPS22.1ft
Overall Length51.44ft
Wheel Base21.9ft
Rear Axle - Tail16.07ft
Dump Clearance - Empty5.72ft
Loading Height - Empty25.54ft
Overall Height - Body Raised48.85ft
Centerline Front Tire Width23.06ft
Front Axle Clearance - Loaded2.81ft
Overall Canopy Width (with rock deflectors)33.15ft
Outside Body/Canopy Width (without rock deflectors)31.62ft
Inside Body Width29.44ft
Front Canopy Height - Empty26.01ft
Rear Axle Clearance - Loaded2.8ft
Centerline of Rear Dual Tire Width19.5ft
Overall Tire Width - Empty30.27ft
Overall Length (High Altitude only)51.87ft
NoteDimensions listed includes canopy deflectors
Sound StandardsThe operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.