Gross Power - SAE J199574.3hp
Net Power - SAE 134972.9hp
Displacement203in³
Bore3.7in
Stroke4.7in
Peak Torque - 1,500 rpm - SAE J1995195ft·lbf
Net Power72.9hp
NoteNet power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan.
Gross Power74.3hp
Engine ModelCat C3.3B DIT (turbo)
Net Power - ISO 924973.7hp
Rated Operating Capacities - 35% Tipping Load2220lb
Tipping Load6345lb
Breakout Force - Tilt Cylinder7285lb
Rated Operating Capacities - 50% Tipping Load3170lb
Ground Contact Area - With 450 mm/17.7 in Track2272in²
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr
Rated Operating Capacity with Optional Counterweight3390lb
Ground Pressure - With 450 mm/17.7 in Track4.4psi
Operating Weight10095lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr
Length - Track on Ground64.2in
Overall Length - Track83.8in
Height - Top of Cab83.2in
Ground Clearance8.9in
Departure Angle32°
Maximum Dump Angle39°
Bucket Pin Height - Carry Position7.8in
Turning Radius from Center - Machine Rear70.7in
Turning Radius from Center - Coupler55.5in
Maximum Overall Height159.5in
Maximum Reach - With Arms Parallel to Ground54in
Turning Radius from Center - Bucket88.8in
Bucket Pin Height - Maximum Lift124.9in
Length - With Bucket on Ground146.2in
Length - Without Bucket117.9in
Reach - Maximum Lift/Dump22.6in
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr
Clearance at Maximum Lift and Dump97.8in
Vehicle Width (450 mm/17.7 in tracks)78in
Rack Back Angle - Maximum Height84°
ROPSISO 3471:2008
FOPSISO 3449:2005 Level I
Outside Cab***103dB(A)
Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab**83dB(A)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Hydraulic Flow - Standard - Loader Hydraulic Pressure3335psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32gal/min
Hydraulic Flow - Standard - Loader Hydraulic Flow23psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)44hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061hp
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76hp
Travel Speed - Forward or Reverse - Two Speed8.3mile/h
Travel Speed - Forward or Reverse - One Speed4.5mile/h
Hydraulic System13.7gal (US)
Hydraulic Tank10.3gal (US)
Fuel Tank27.7gal (US)
Engine Crankcase3gal (US)
Cooling System3.7gal (US)
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.