226D3 Skid Steer Loader

The Cat® 226D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Request a Quote

Gross Power - SAE J199567.1hp

Net Power - SAE 134965.8hp

Displacement134.3in³

Stroke3.9in

Bore3.3in

Engine ModelCat C2.2 CRDI

Peak Torque - 1,500 rpm - SAE J1995153ft·lbf

Net Power - ISO 924966.5hp

Rated Operating Capacity1550lb

Rated Operating Capacity with Optional Counterweight1650lb

Tipping Load3100lb

Breakout Force - Tilt Cylinder3927lb

Note* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery

Operating Weight5849lb

Note* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery

Wheel Base41.5in

Length - With Bucket on Ground127.3in

Length - Without Bucket99.4in

Height - Top of Cab79.8in

Vehicle Width over Tires58.9in

Maximum Overall Height143.8in

Bucket Pin Height - Maximum Lift110.9in

Bucket Pin Height - Carry Position8.5in

Reach - Maximum Lift/Dump21in

Clearance at Maximum Lift and Dump81.8in

Ground Clearance6.9in

Departure Angle27.9°

Maximum Dump Angle46.7°

Rack Back Angle - Maximum Height88.9°

Bumper Overhang - Behind Rear Axle35.2in

Turning Radius from Center - Bucket77.8in

Maximum Reach - With Arms Parallel to Ground50.7in

Turning Radius from Center - Machine Rear59.6in

Turning Radius from Center - Coupler43.5in

Note* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery

ROPSISO 3471:2008

FOPSISO 3449:2005 Level I

Chain Box - Each Side1.8gal (US)

Cooling System3.2gal (US)

Engine Crankcase2.6gal (US)

Fuel Tank15.1gal (US)

Hydraulic System11.9gal (US)

Hydraulic Tank9gal (US)

Hydraulic Flow - Standard - Loader Hydraulic Pressure3336psi

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure3336psi

Hydraulic Flow - Standard - Hydraulic Power (Calculated)33.5hp

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)50.9hp

Hydraulic Flow - Standard - Loader Hydraulic Flow18gal/min

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow26gal/min

Travel Speed - Forward or Reverse - One Speed7.6mile/h

Travel Speed - Forward or Reverse - Two Speed Option11.1mile/h

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Outside Cab***102dB(A)

Inside Cab**83dB(A)

Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (2)**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe

Standard

12 volt Electrical System

80 ampere Alternator

Ignition Key Start/Stop Switch

Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light

Backup Alarm

Heavy Duty Battery, 850 CCA

Standard

Gauges: Fuel Level, Hour Meter

Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged

Fold In Ergonomic Contoured Armrest

Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages

ROPS Cab, Open, Tilt Up

FOPS, Level I

Top and Rear Windows

Floor Mat

Interior Rearview Mirror

12 volt Electric Socket

Horn

Hand (Dial) Throttle, Electronic

Adjustable Joystick Controls

Anti-theft Security System with 6-button Keypad

Storage Compartment with Netting

Standard

Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards

Air Cleaner, Dual Element, Radial Seal

S·O·SSM Sampling Valve, Hydraulic Oil

Filters, Cartridge-type, Hydraulic

Filters, Canister-type, Fuel and Water Separator

ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)

Spring Applied, Hydraulically Released Parking Brakes

Hydrostatic Transmission

Four Wheel Chain Drive

Standard

Engine Enclosure, Lockable

Extended Life Antifreeze, –36° C (–33° F)

Machine Tie Down Points (6)

Support, Lift Arm

Hydraulic Oil Level Sight Gauge

Radiator Coolant Level Sight Gauge

Radiator, Expansion Bottle

Cat ToughGuard Hose

Auxiliary, Hydraulics, Continuous Flow

Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release

Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm

Electrical Outlet, Beacon

Belly Pan Cleanout

Variable Speed Demand Fan

Product Link PL240, Cellular

Standard

Hydraulics, Standard or High Flow

Quick Coupler, Mechanical or Powered

Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)

EU Preparation Package (Europe only)

Power Train: One Speed, One Speed with Ride Control, Two Speed

Tires, 10 × 16.5

PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)

COMFORT PACKAGES:
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Air Conditioner, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)

Optional

Hand-Foot Style Controls

External Counterweights

Beacon, Rotating

Engine Block Heater – 120V

Oil, Hydraulic, Cold Operation

Product Link PL641, Cellular

Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response, and Creep Control; Standard Equipment in Europe Only

Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.