Gross Power - SAE J199567.1hp
Net Power - SAE 134965.8hp
Displacement134.3in³
Stroke3.9in
Bore3.3in
Peak Torque - 1,500 rpm - SAE J1995153ft·lbf
Net Flywheel Power65.8hp
Net Power - ISO 924966.5hp
Engine ModelCat C2.2 CRDI
Rated Operating Capacity1900lb
Tipping Load3800lb
Breakout Force - Tilt Cylinder3928lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Rated Operating Capacity with Optional Counterweight2000lb
Operating Weight6514lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Wheel Base41.5in
Height - Top of Cab79.9in
Vehicle Width over Tires58.9in
Ground Clearance6.7in
Departure Angle27.9°
Maximum Dump Angle47.4°
Length - Without Bucket99.3in
Clearance at Maximum Lift and Dump88.7in
Bucket Pin Reach - Maximum Lift8.8in
Maximum Overall Height150.9in
Turning Radius from Center - Machine Rear59.6in
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Bucket Pin Height - Carry Position8.4in
Length - With Bucket on Ground127.3in
Bumper Overhang - Behind Rear Axle35.2in
Turning Radius from Center - Bucket77.8in
Maximum Reach - With Arms Parallel to Ground49.2in
Bucket Pin Height - Maximum Lift118.1in
Reach - Maximum Lift/Dump25.7in
Rack Back Angle - Maximum Height88.2°
Turning Radius from Center - Coupler43.4in
ROPSISO 3471:2008
FOPSISO 3449:2005 Level I
Cooling System3.2gal (US)
Engine Crankcase2.6gal (US)
Fuel Tank15.1gal (US)
Hydraulic System11.9gal (US)
Hydraulic Tank9gal (US)
Chain Box - Each Side1.8gal (US)
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow26gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)35.5hp
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure3336psi
Hydraulic Flow - Standard - Loader Hydraulic Flow18gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure3336psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)50.9hp
Travel Speed - Forward or Reverse - One Speed7.6mile/h
Travel Speed - Forward or Reverse - Two Speed Option11.1mile/h
Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab*83 dB(A)
Outside Cab**101 dB(A)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.