Gross Power - SAE J199574.3hp
Net Power - SAE 134973.2hp
Displacement203in³
Stroke4.7in
Bore3.7in
Net Flywheel Power73.2hp
Engine ModelCat C2.2
Peak Torque - 1,500 rpm - SAE J1995195ft·lbf
Net Power - ISO 924973.9hp
Rated Operating Capacity1800lb
Tipping Load3600lb
Breakout Force - Tilt Cylinder5003lb
Rated Operating Capacity with Optional Counterweight2000lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte
Operating Weight6567lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte
Wheel Base43.5in
Height - Top of Cab82in
Vehicle Width over Tires66in
Ground Clearance7.7in
Departure Angle26°
Maximum Dump Angle48°
Maximum Reach - With Arms Parallel to Ground53.3in
Turning Radius from Center - Machine Rear64.5in
Bucket Pin Height - Maximum Lift122.9in
Length - Without Bucket108.9in
Rack Back Angle - Maximum Height91°
Turning Radius from Center - Bucket83in
Turning Radius from Center - Coupler51.8in
Clearance at Maximum Lift and Dump92.9in
Reach - Maximum Lift/Dump16in
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte
Bumper Overhang - Behind Rear Axle40.2in
Maximum Overall Height156.6in
Length - With Bucket on Ground137.3in
Bucket Pin Height - Carry Position7.5in
ROPSISO 3471:2008
FOPSISO 3449:2005 Level I
Chain Box - Each Side2.3gal (US)
Cooling System3.7gal (US)
Engine Crankcase3gal (US)
Fuel Tank24.8gal (US)
Hydraulic System13.2gal (US)
Hydraulic Tank10.3gal (US)
Hydraulic Flow - Standard - Loader Hydraulic Flow20gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure3335psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)39hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure3335psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow30gal/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)58hp
Travel Speed - Forward or Reverse - Two Speed Option10.6mile/h
Travel Speed - Forward or Reverse - One Speed7mile/h
Outside Cab**101 dB(A)
Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab*83 dB(A)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.