Gross Power - SAE J199574.3hp
Net Power - SAE 134972.9hp
Displacement203in³
Stroke4.7in
Bore3.7in
Peak Torque - 1,500 rpm - SAE J1995195ft·lbf
Engine ModelCat C3.3B DIT (turbo)
Net Power - ISO 924973.7hp
Net Flywheel Power72.9hp
Rated Operating Capacity2200lb
Tipping Load4400lb
Breakout Force - Tilt Cylinder7355lb
Rated Operating Capacity with Optional Counterweight2410lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
Operating Weight7478lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
Wheel Base49.2in
Height - Top of Cab83.1in
Vehicle Width over Tires66in
Ground Clearance8.9in
Departure Angle26°
Maximum Dump Angle39°
Maximum Overall Height158.7in
Maximum Reach - With Arms Parallel to Ground54.6in
Length - With Bucket on Ground146in
Turning Radius from Center - Coupler55.2in
Bucket Pin Height - Carry Position7.9in
Bucket Pin Height - Maximum Lift124.2in
Clearance at Maximum Lift and Dump97.1in
Turning Radius from Center - Bucket85.9in
Turning Radius from Center - Machine Rear71.2in
Reach - Maximum Lift/Dump23.6in
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou
Bumper Overhang - Behind Rear Axle42.6in
Rack Back Angle - Maximum Height96°
Length - Without Bucket117.8in
ROPSISO 3471:2008
FOPSISO 3449:2005 Level I
Chain Box - Each Side3.3gal (US)
Cooling System3.7gal (US)
Engine Crankcase3gal (US)
Fuel Tank27.7gal (US)
Hydraulic System13.7gal (US)
Hydraulic Tank10.3gal (US)
Hydraulic Flow - Standard - Loader Hydraulic Pressure3335psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)44hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061psi
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32gal/min
Hydraulic Flow - Standard - Loader Hydraulic Flow23gal/min
Travel Speed - Forward or Reverse - One Speed7.7mile/h
Travel Speed - Forward or Reverse - Two Speed Option11mile/h
Inside Cab*81 dB(A)
Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**101 dB(A)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.