Gross Power - SAE J199598hp
Net Power - SAE 134995hp
Displacement232in³
Stroke4.7in
Bore3.9in
Peak Torque - 1,500 rpm - SAE J1995246ft·lbf
Engine ModelCat C3.8 DIT (turbo)
Net Power - ISO 924996hp
Net Flywheel Power95hp
Rated Operating Capacity3450lb
Tipping Load6900lb
Breakout Force - Tilt Cylinder7443lb
Breakout Force - Lift Cylinder6074lb
Rated Operating Capacity with Optional Counterweight3690lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt
Operating Weight9133lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt
Wheel Base54.6in
Height - Top of Cab82.4in
Vehicle Width over Tires72in
Ground Clearance8.9in
Departure Angle27°
Maximum Dump Angle51°
Bucket Pin Reach - Maximum Lift14.7in
Bucket Pin Height - Maximum Lift127.1in
Turning Radius from Center - Machine Rear74.7in
Reach - Maximum Lift/Dump30.3in
Bumper Overhang - Behind Rear Axle46.2in
Length - Without Bucket127.6in
Maximum Overall Height160.1in
Turning Radius from Center - Coupler58.3in
Maximum Reach - With Arms Parallel to Ground50.5in
Clearance at Maximum Lift and Dump96in
Length - With Bucket on Ground155.7in
Bucket Pin Height - Carry Position7.8in
Turning Radius from Center - Bucket (racked)89.8in
Rack Back Angle - Maximum Height84°
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt
Roll Back Angle28°
ROPSISO 3471:2008
FOPSISO 3449:2005 Level I
Cooling System4.1gal (US)
Engine Crankcase3.5gal (US)
Fuel Tank31.7gal (US)
Hydraulic System14.5gal (US)
Hydraulic Tank10.3gal (US)
Chain Box - Each Side2.7gal (US)
Diesel Exhaust Fluid (DEF) Tank5gal (US)
Hydraulic Flow - Standard - Loader Hydraulic Flow23gal/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76hp
Hydraulic Flow - Standard - Hydraulic Power (Calculated)44hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure3335psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061psi
Travel Speed - Forward or Reverse - One Speed6.6mile/h
Travel Speed - Forward or Reverse - Two Speed Option9.4mile/h
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Outside Cab**102 dB(A)
Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab*83 dB(A)
Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.