Gross Power - SAE J1995110hp
Net Power - SAE 1349106hp
Displacement232in³
Stroke4.7in
Bore3.9in
Net Flywheel Power106hp
Engine ModelCat C3.8 DIT (turbo)
Net Power - ISO 9249107hp
Peak Torque - 1,500 rpm - SAE J1995276ft·lbf
Rated Operating Capacity3700lb
Tipping Load7400lb
Breakout Force - Tilt Cylinder7362lb
Breakout Force - Lift Cylinder6085lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rated Operating Capacity with Optional Counterweight3950lb
Operating Weight9573lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Wheel Base54.6in
Height - Top of Cab84in
Vehicle Width over Tires76in
Ground Clearance10.4in
Departure Angle28°
Maximum Dump Angle51°
Bumper Overhang - Behind Rear Axle46.2in
Turning Radius from Center - Machine Rear74.7in
Length - Without Bucket127in
Reach - Maximum Lift/Dump29in
Clearance at Maximum Lift and Dump97.4in
Bucket Pin Height - Maximum Lift128.6in
Bucket Pin Height - Carry Position9.3in
Turning Radius from Center - Coupler57.7in
Bucket Pin Reach - Maximum Lift13.5in
Rack Back Angle - Maximum Height84°
Maximum Overall Height161.5in
Length - With Bucket on Ground155in
Maximum Reach - With Arms Parallel to Ground49.1in
Turning Radius from Center - Bucket (racked)90.6in
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Roll Back Angle28°
ROPSISO 3471:2008
FOPSISO 3449:2005 Level I
Cooling System4.1gal (US)
Engine Crankcase3.5gal (US)
Fuel Tank31.7gal (US)
Hydraulic System14.5gal (US)
Hydraulic Tank10.3gal (US)
Chain Box - Each Side2.7gal (US)
Diesel Exhaust Fluid (DEF) Tank5gal (US)
Standard Flow Mode - Loader Hydraulic Pressure3335psi
Standard Flow Mode - Hydraulic Power - Calculated44hp
Standard Flow Mode - Loader Hydraulic Flow23gal/min
Note*When equipped with Cat 400 Series work tools.
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure4061psi
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*40gal/min
Hydraulic Flow - XE - Hydraulic Power (calculated)94hp
Travel Speed - Forward or Reverse - One Speed7.2mile/h
Travel Speed - Forward or Reverse - Two Speed10.3mile/h
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Note (2)**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Outside Cab***104dB(A)
Inside Cab**83dB(A)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.