Engine ModelCat® C3.6
Power - Net92hp
Displacement220in³
Net Power - 2,200 rpm - SAE J134992hp
Net Power - 2,200 rpm - ISO 9249/EEC 80/126992hp
Note (1)Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Power TrainHydrostatic
Note (2)All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Operating Weight18382lb
Operating Weight18382lb
Operating Weight - LGP19066lb
Note (2)For machine with ripper, add 554 kg (1,222 lb).
Note (1)Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Drive Pumps1
Maximum Travel Speed - Forward5.6mile/h
Relief Valve Settings7033psi
Maximum Travel Speed - Reverse6.2mile/h
Track Motors2
Pump Output17.2gal/min
Relief Valve Settings2988psi
TypeParallelogram
Number of Shanks3
Height6.5in
Weight1222lb
Maximum Digging Depth13.3in
Maximum Ground Clearance Under Tip17.6in
Overall Width67.3in
Maximum Reach - Ground Line30.2in
FOPSISO 3449:2005 Level II
ROPSISO 3471:2008
Length - Track on Ground - LGP89in
Track Gauge61in
Number of Rollers - Each Side7
Track Gauge - LGP68in
Ground Pressure - LGP4.3psi
Shoe Width - Standard18in
Shoe Width - LGP25in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage43
Number of Shoes - Each Side - Abrasion Undercarriage38
Ground Pressure5.7psi
Length of Track on Ground89in
Fuel Tank51.5gal (US)
Crankcase - With Filter2.8gal (US)
Final Drive - Each - LGP2.6gal (US)
Cooling System5gal (US)
Transmission - Hydraulic Tank23.8gal (US)
Diesel Exhaust Fluid (DEF) Tank4.9gal (US)
Final Drives - Each Side2.6gal (US)
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
BLADE: Digging Depth - LGP23.2in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP52° to 58°
BLADE: Blade Lift Height - LGP27.9in
BLADE: Blade Width - LGP124in
BLADE: Blade Width at Maximum Angle - LGP113.1in
Track Gauge - LGP67.9in
Ground Clearance - LGP13in
BLADE: Blade Height - LGP35.8in
Overall Length - With Blade - LGP168.2in
BLADE: Blade Capacity (SAE) - LGP2.42yd³
BLADE: Maximum Tilt - LGP17.2in
BLADE: Maximum Angle (either side) - LGP25°
BLADE: Maximum Angle (either side) - Standard25°
Ground Clearance - Standard13in
Overall Length - With Blade - Standard168.5in
NoteAbrasion Undercarriage
BLADE: Blade Cutting Edge Angle, Adjustable - Standard52° to 58°
BLADE: Maximum Tilt - Standard15.2in
Track Gauge - Standard61in
BLADE: Digging Depth - Standard23.3in
BLADE: Blade Width - Standard109.5in
BLADE: Blade Lift Height - Standard29.3in
BLADE: Blade Capacity (SAE) - Standard2.59yd³
BLADE: Blade Width at Maximum Angle - Standard100.1in
NoteWith Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
BLADE: Blade Height - Standard39.8in
Length of Basic Dozer (without blade) - LGP129.5in
Width of Dozer (standard shoes, no blade) - Standard79.1in
Dozer Height - LGP108.9in
Dozer Height - Standard108.9in
Width of Dozer (standard shoes, no blade) - LGP92.9in
Length of Basic Dozer (without blade) - Standard129.5in
Maximum line pull – bare drum40000lb
Drum capacity – recommended cable371ft
Winch length27.76in
Overall width29.2in
ControlHydraulic
Maximum line speed – bare drum131ft/min
Maximum line speed – full drum207ft/min
Drum width10.8in
Drum capacity – optional256ft
Throat clearance6.75in
Weight1345lb
Rope diameter – recommended0.63in
SpeedVariable
Maximum line pull – full drum25000lb
Drum diameter10in
Rope diameter – optional0.75in
Winch driveHydrostatic
Maximum Line Speed - Full Drum79ft/min
Maximum Line Speed - Bare Drum50ft/min
Weight1747lb
Drum Capacity - Optional Cable195ft
Rope Diameter - Recommended0.63in
Winch DriveHydraulic
Rope Diameter - Optional0.75in
Drum Capacity - Recommended Cable277ft
Maximum Line Pull - Full Drum20350lb
SpeedVariable
Maximum Line Pull - Bare Drum32150lb
ControlHydraulic
Overall width27.91in
Drum Width9.65in
Drum Diameter8in
Winch Length35.63in
Throat Clearance5.6in