815 Soil Compactor

Gross Power (SAE J1995:2014)284hp

Net Power (SAE J1349:2011)249hp

Net Power (ISO 9249:2007)249hp

EmissionsMeets U.S. EPA Tier 4 Final/EU Stage V emission standards

Rated Speed2200r/min

Engine ModelCat® C7.1: configured for two emissions options

Engine Power (ISO 14396:2002)275hp

Peak Torque - 1,400 rpm902lb-ft @ 1400 rpm

Torque Rise52%

Bore4.1in

Stroke5.3in

Displacement427.8in³

High Idle Speed2270r/min

Low Idle Speed800r/min

Maximum Altitude without Derating9842.5ft

NoteNet power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Engine ModelCat® C7.1: configured for two emissions options

Net Power (SAE J1349:2011)249hp

EmissionsBrazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA

Rated Speed2200r/min

Gross Power (SAE J1995:2014)286hp

Engine Power (ISO 14396:2002)275hp

Peak Torque - 1,400 rpm749lb-ft @ 1400 rpm

Torque Rise26%

Bore4.1in³

Stroke5.3in

Displacement5.3in

High Idle Speed2270r/min

Low Idle Speed800r/min

Maximum Altitude without Derating9842.5ft

NoteNet power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Operating Weight49652lb

Transmission TypeCat Planetary Power Shift

Travel Speeds - Forward - First3.9mile/h

Travel Speeds - Forward - Second7.7mile/h

Travel Speeds - Forward - Third11.3mile/h

Travel Speeds - Reverse - First4.5mile/h

Travel Speeds - Reverse - Second8.5mile/h

Travel Speeds - Reverse - Third11.4mile/h

Lift/Tilt System - CircuitPilot operated LS valve with EH

Lift/Tilt SystemVariable displacement piston

Maximum Flow at 2,200 rpm23.5gal/min

Relief Valve Setting - Lift/Tilt3190psi

Pilot SystemOpen center, fixed displacement gear

Pilot Relief Valve Setting3046psi

Steering System - CircuitPilot, Load Sensing

Steering System - PumpPiston – Variable Displacement

Maximum Flow at 2,200 rpm38.8gal/min

Relief Valve Setting - Steering4003psi

Total Steering Angle84

Steering Cycle Times - High Idle3s

Steering Cycle Times - Low Idle8.2s

Fuel Tank132.1gal (US)

Diesel Exhaust Fluid Tank*4.2gal (US)

Cooling Systems - Tier 4 Final/EU Stage V21.4gal (US)

Cooling System - Tier 3/Stage IIIA Equivalent19.3gal (US)

Engine Crankcase5.3gal (US)

Transmission14.8gal (US)

Differential - Final Drives - Front17.2gal (US)

Differential - Final Drives - Rear17.2gal (US)

Hydraulic Tank Only19.8gal (US)

NoteAll non-road Tier 4 Final and Stage V diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA

Height - Top of Beacon12.9ft

Height - Top of Cab Roof12ft

Height - Top of Exhaust Pipe11.1ft

Height - Top of Hood8.6ft

Height to Top of Radiator Guard7.9ft

Ground Clearance to Hitch1.2ft

Ground Clearance to Transmission Guard1.2ft

Ground Clearance to Bottom of Bumper2.2ft

Centerline of Rear Axle to Bumper6.5ft

Hitch to Centerline of Front Axle5.5ft

Wheel Base11ft

Width over Platform10.3ft

Height to Top of GPS Antenna12.1ft

Overall Machine Length with Straight Blade23.5ft

Overall Machine Length with EU Suppression24.9ft

FrontPlanetary – Fixed

RearPlanetary – Oscillating

Oscillation Angle±10

Service BrakesSingle Disc Wet (Enclosed) 2 WHL

Parking BrakeDrum and Shoe, Spring Applied, Hydraulic Released

Operator Sound Level (ISO 6396)70dB(A)

Machine Sound Level (ISO 6395)111dB(A)

Note (1)The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Note (2)The operator sound pressure level uncertainty is ± 2 dB(A)

Note (3)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Note (4)The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Operator Sound Level (ISO 6396)70dB(A)

Machine Sound Level (ISO 6395)109dB(A)

Note (1)The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Note (2)The operator sound pressure level uncertainty is ± 2 dB(A)

Note (3)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Note (4)The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Operator Sound Level (ISO 6396)70dB(A)

Machine Sound Level (ISO 6395)112dB(A)

Note (1)The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Note (2)The operator sound pressure level uncertainty is ± 2 dB(A)

Note (3)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Note (4)The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Operator Sound Level (ISO 6396)70dB(A)

Machine Sound Level (ISO 6395)110dB(A)

Note (1)The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Note (2)The operator sound pressure level uncertainty is ± 2 dB(A)

Note (3)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Note (4)The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Machine Sound Level (ISO 6393)107dB(A)

Note (1)The machine sound power level was measured according to the test procedures and conditions specified in ISO 6393:2008. The measurement was conducted at the rated engine cooling fan speed.

Weight9720lb

Outside Diameter55.6in

Drum Diameter40.5in

Drum Width39in

Tips per Row12

Tips per Wheel60

ReplaceableWeld On

Width - Over Drums127.7in

Width Between Drums49.6in

Tip Height7.5in

Capacity2.69yd³

Overall Width12.3ft

Height2.8ft

Digging Depth0.7ft

Ground Clearance2.6ft

Maximum Tilt1.1ft

Turning Radius - Outside Corner of Blade21.1ft

Turning Radius - Inside Face of Pusharm8.3ft

Weight1764lb

Total Operating Weight49652lb

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Advanced Productivity Electronic Control System (APECS)

Air to air aftercooler

Brakes, full hydraulic, enclosed, wet multiple disc service brakes

Cat clean emission module (Tier 4 Final/Stage IV only)

Electro-hydraulic parking brake

Electronic Clutch Pressure Control (ECPC)

Engine, Cat C7.1 (configured for two emissions options): – Tier 4 Final/Stage V – Tier 3/Stage IIIA equivalent

Engine driven cooling fan – suction

Fuel priming pump (electric)

Fuel to air cooler

Ground level engine shutoff

Muffler (under hood) (Tier 3/Stage IIIA equivalent only)

Radiator, unit core

Starting aid (ether)

Throttle lock

Torque converter

Transmission, planetary, with 3F/3R speed range control

Standard

Alarm, back-up

Alternator, 150 amp

Batteries, maintenance-free

Electrical system, 24V

Ground level lockable master disconnect switch

Lights, directional (rear)

Light, warning switched (LED strobe)

Lighting system, (front and rear)

Starter, electric

Starting receptacle for emergency start

Standard

12V power port for mobile phone or laptop connection

AccuGrade^™ mapping (ready)

Air conditioner

Cab, sound-suppressed pressurized

Cab door, sliding window (LH)

Cat Compaction Control (ready)

Cat Detect: Object Detection (ready)

Coat and hard hat hooks

Finger tip shifting controls

Flip-up armrest

Heater and defroster

Horn, electric

Hydraulic controls – seat mounted

Implement hydraulic lockout

Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage V only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature

Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status

Light, (dome) cab

Lunch box and beverage holders

Mirror, internal (panoramic)

Mirrors, rearview (externally mounted)

Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)

Seat, Cat Premium Plus (leather)

Seat belt with minder, retractable, 76 mm (3 in) wide

STIC control system with lockout

Sun visor, front

Tinted glass

Transmission gear (indicator)

Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill

Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)

Optional

Camera, rear vision

Radio, AM/FM/AUX/USB/BLUETOOTH

Radio, CB (ready)

Standard

Wheels, tamping foot

Standard

Cleaner bars with teeth

Guards, crankcase and power train

Guard, driveshaft

Standard

Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)

Optional

Antifreeze, –50° C (–58° F)

Standard

DEF tank fill gauge

Doors, service access (locking)

Ecology drains for engine, radiator, transmission, hydraulic tank

Engine, crankcase, 500 hour interval with CJ-4 oil

Emergency platform egress

Fire suppression ready

Fuel tank, 500 L (132.1 gal)

Hitch, drawbar with pin

Hoses, Cat XT^™

Hydraulic, engine, and transmission oil coolers

Oil change system, high speed

Oil sampling valves

Steering, load sensing

Total hydraulic filtration system

Vandalism protection caplocks

Venturi stack

Standard

Hydraulics: – Standard or EU and Canada

Standard

Glass (window): – rubber-mounted glass

Precleaner (cab): – powered

Seat (cab): – heated and ventilated

Mirrors – cab: – Standard or heated

Standard

Axles: – Standard or non-spin rear

Standard

Engine Precleaners: – Turbine or dual stage

Standard

Lights: – Standard or LED

Standard

Fuel tank: – Non-fast or fast fill

Standard

Product Link: – GSM, satellite

Standard

Cleaner bars: – Standard or abrasive

Standard

Blades: – Straight or tilt-straight

Optional

Compaction control, basic

Optional

Sound suppression (required for Brazil)

Optional

Heater, engine coolant, 120V

Heater, engine coolant, 240V

Optional

Film (ANSI) (Tier 4 Final/Stage V only)

EU certification (Tier 4 Final/Stage V only)

Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)