TH255C Telehandler

Rated Load Capacity5500lb

Maximum Lift Height18.37ft

Engine ModelTD 2.9L L4*

Gross Power74hp

Displacement177in³

Maximum Torque - 1,800 rpm193lb/ft

Note*Emits equivalent to U.S. EPA Tier 4 Interim

Standard12.00 × 16.5

Optional14.00 × 17.5; 10.5 × 18; 33 × 12-20 non-marking

Fuel Tank24gal (US)

Hydraulic System24gal (US)

Boom Up6.8s

Boom Down4.6s

Tele In3.8s

Tele Out6.7s

Bucket Dump2.5s

Drawbar Pull - Loaded8700lb

Bucket Crowd2s

Operating Weight - With Carriage and Forks11000lb

Parking BrakesWet disc spring-applied hydraulic release

Service BrakesInboard wet disc brakes on front axle

FeatureLight on dash indicates when brake is on.

Types (1)Planetary on front and rear axles.

Types (2)High bias limited slip differential on front axle.

ForwardVariable Speed

TransmissionHydrostatic

ReverseVariable Speed

Types (1)Indicators for machine hours, fuel-level, steer mode, steering pressure, battery charge, coolant temperature, parking brake and engine pre-heat.

Types (3)Panel and switches are illuminated for night operation.

Types (2)Reverse motion alarm.

Maximum Auxiliary Flow19gal/min

NoteAuxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines.

Maximum System Pressure3500psi

Pump TypeGear pump

Capacity at Maximum Height4400lb

Maximum Forward Reach10.83ft

Turning Radius - Over Tires - 14 × 17.5 Tires125in

Top Travel Speed - 12 × 16.5 Tires15mile/h

Capacity at Maximum Reach1850lb

Rated Load Capacity5500lb

Maximum Lift Height18.37ft

Turning Radius - Over Tires - 12 × 16.5 Tires127in

Top Travel Speed - 14 × 17.5 Tires17mile/h

Capacity at Maximum Height3000lb

Maximum Lift Height18.37ft

Maximum Forward Reach10.83ft

Turning Radius - Over Tires - 14 × 17.5 Tires125in

Top Travel Speed - 12 × 16.5 Tires15mile/h

Top Travel Speed - 14 × 17.5 Tires17mile/h

Rated Load Capacity5500lb

Turning Radius - Over Tires - 12 × 16.5 Tires127in

Capacity at Maximum Reach1700lb

Standard

Canopy, Fixed Steering Column

Sunscreen

Mechanical Suspension Seat with Seat Belt

Mechanical Parking Brake

Optional

Canopy, Tilt Steering Column

Cab Enclosed with Heat

Cab Enclosed with Heat and Air Conditioning

Screen Guard

Roof Guard

Heater/De-mister

Air Conditioning

Seatbelt, 76 mm (3 in)

Column Mounted FNR Lever

Front, Rear, and Roof Wipers

Standard

1 × 12V 1,000 CCA Battery

Reverse Alarm

Optional

Block Heater 110 Volt

Work Lights, 4 × Cab Mounted (2 front, 2 rear) 2 × Boom Mounted

Product Link Ready, Version 641

Seven (7) Pin Trailer Service

Rotating Beacon

Radio Ready

Battery Disconnect

Standard

Boom Brushes

Single Auxiliary Service to Boom Head

Optional

Auxiliary Service to Rear

Rear Hitch Mirror, Flat

Rear Hitch Mirror, Convex

Tool Box

Boom Safety Brace

Wheel Chocks

Remote Grease System

Standard

Mitas 12 × 16.5, Pneumatic

Optional

14 × 17.5, Pneumatic

12 × 16.5, Foam

14 × 17.5, Foam

10.5-18, Pneumatic

33 × 22, Solid Non-Marking

Standard

Manual Quick Coupler

Note: Standard Coupler or Universal Quick Coupler options are available, and must be selected, please consult your Cat dealer for details.

Optional

Hydraulic Quick Coupler

Note: Standard Coupler or Universal Quick Coupler options are available, and must be selected, please consult your Cat dealer for details.

Optional

Retrieval Hitch

Manual Hitch

Automatic Adjustable Hitch

Optional

Floating Fork Carriage

Side Shift Carriage

Side Tilt/Rotate Carriage

0.36 m3 (0.48 yd3) Multi Purpose Bucket

0.76 m3 (1.0 yd3) General Purpose Bucket

0.76 m3 (1.0 yd3) Grapple Bucket

1.0 m3 (1.3 yd3) Multi Purpose Bucket

1.5 m3 (1.95 yd3) Light Material Bucket

1225 mm (48 in) Bale Fork

Grapple Bucket

Muck Fork and Grapple

Material Handling Arm for Universal Quick Coupler

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.