735 Articulated Truck

Engine ModelCat® C13

Bore5.1in

Stroke6.2in

Displacement736in³

Peak Engine Torque Net (SAE J1349)1597ft·lbf

Peak Engine Torque Speed1200r/min

Net Power - SAE J1349:2011424hp

EmissionsThe 735 meets Tier 4 Final and Stage V emission standards.

Peak Engine Torque Gross (SAE J1995)1614ft·lbf

Note (3)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

No Engine De-rating Below12500ft

Note (2)The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.

Net Power - ISO 14396429hp

Gross Power - SAE J1995:2014434hp

Note (5)DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Note (4)Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.

Note (1)The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.

Engine Model - U.S. EPA Tier 4 Final/EU Stage VCat C13

Rated Payload35.3ton (US)

Heaped (SAE 2:1)26.2yd³

Struck20.3yd³

Tailgate Heaped SAE 2:127.9yd³

Tailgate Struck21.3yd³

Forward - 15mile/h

Forward - 29mile/h

Forward - 314mile/h

Forward - 422mile/h

Forward - 530mile/h

Forward - 635mile/h

Reverse - 16mile/h

Fuel Tank108.8gal (US)

Cooling System21.9gal (US)

Hydraulic System29.1gal (US)

Engine Crankcase10gal (US)

Transmission12.3gal (US)

Final Drives/Differential33gal (US)

Output Transfer Gear Box5.5gal (US)

DEF Tank5.3gal (US)

Interior Cab72dB(A)

Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Note (1)The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the

Raise Time12s

Lower Time11s

BrakesISO 3450 – 2011

Cab - FOPSISO 3449 Level II – 2005

Cab - ROPSISO 3471 – 2008

SteeringISO 5010 – 2007

Total - Loaded126192lb

Front Axle - Empty34128lb

Total - Rated Load70548lb

Rear Axle - Loaded41270lb

Rear Axle - Empty10516lb

Center Axle - Empty11001lb

Center Axle - Rated Load30754lb

Front Axle - Loaded43166lb

Total - Empty55645lb

Front Axle - Rated Load9039lb

Rear Axle - Rated Load30754lb

Center Axle - Loaded41756lb

Lock to Lock4.75 seconds @ 60 rpm

TypeHigh strength Brinell HB450 wear resistant steel

Turning Dimensions - SAE Turning Radius294in

Turning Dimensions - Inside Radius149in

Turning Dimensions - Clearance Radius318in

NoteDimensions are for machines equipped with 750/65 R25 tires.

Turning Dimensions - Steer Angle - Left/Right45°

Turning Dimensions - Aisle Width212in

Hydraulic Excavators: 336F/336F XE - Passes5–6

NoteAn optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased

Hydraulic Excavators: 349F/349F XE - Passes4–5

Wheel Loaders: 972M/972M XE - Passes3–4

Wheel Loader: 962M - Passes4–5

Wheel Loader: 950M - Passes5

Wheel Loaders: 966M/966M XE - Passes4

Base Plate0.51in

Front Plate0.28in

Side Plates0.43in

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Tilt and telescopic steering wheel

Adjustable air vents

Retractable belt: Operator seat and second seat

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS)
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Air conditioning with R134A refrigerant

Mirrors: extensive arrangement for improved visibility

Combined gear selection and hoist control lever

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Sun visor

Windshield wiper and washer, two speed (rear)

Windshield wiper and washer, two speed, intermittent (front)

Windows opening side, tinted

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Touchscreen display incorporating the rearview camera video feed

Secondary steering – electro hydraulic

Heater and defroster with four-speed fan

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Standard

Cat Detect with Stability Assist

Product Link

Standard

Remote starting receptacle (cables not included)

Horn

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators

Main disconnect switch

Electrical system: 24-volt, 10A 24- to 12-volt converter

Batteries (two) maintenance free

Standard

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Cat Clean Emission Module (CEM) and exhaust aftertreatment package

Cat C13 engine

Three axle, six-wheel drive

Retarder: engine compression brake

Dual circuit oil immersed, enclosed brakes – all wheels

Auto shift six-speed forward and one reverse transmission

Standard

Rearview camera

ROPS/FOPS cab

Reverse alarm

Standard

Radiator

Front dump body spill guard, integral part of fabricated body

Crankcase

Rear window

Axle

Standard

Tires, six 750/65 R25

Mud flaps: wheel arch and body mounted with transportation tiebacks

S·O·S sampling valves

Vandalism protection: lockable caps

Sound suppression (only standard in Europe)

Optional

Engine block heater

Heated rearview motorized mirrors

Scissor tailgate

Ether start

Flashing LED beacon

Cold weather start attachment

Infrared glass – high ambient cab

Product Link Elite: PLE631 (satellite), PLE641 (cellular). Product Link is optional.

Bare chassis (no body) standard wheel base

Fuel additive – anti-waxing

Body liners

Bare chassis (no body) long wheel base

Four-point seat belt

Auto lube installation for automatic greasing of bearings

Cat Production Measurement payload monitoring system

Sound suppression (only standard in Europe)

Fast fuel fill

Heated/cooled seat

Roof mounted High Intensity Discharge (HID) work lights

Machine Security System (MSS)

Bluetooth radio stereo system

Exhaust heated body

Cold weather coolant –51° C (–60° F)

Window blinds

Wheel chocks