PMC-V Human Machine Interface for PMC-D Drive Control Systems

PMC-V Human Machine Interface for PMC-D Drive Control Systems

In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation.

Request a Quote

Operating SystemµITRON RTOS

Processor32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes

RAM Memory4Mbytes CMOS Static RAM, 4Mbytes Flash

Width9.49in

Height5.83in

Length13.19in

Components (2)IP 68

Components (4)12 SKK24 sockets for power supply, communication, sensors and actuators

Components (3)Optional additional Profibus communication channel for communication with third party computer

Components (1)320 × 240 pixel b/w graphics display

Components (5)Power: 12 W

Types (3)More certifications on demand

Types (4)Australia: IECEx, ANZEx

Types (6)Russia: GOST

Types (2)U.S.: MSHA

Types (1)Europe: ATEX

Types (5)China: MA

Supply Voltage - Typical Value12 V DC

Supply Current - Typical Value1A

Supply Current - Maximum Ratings1.5A

Supply Voltage - Maximum Ratings9.5 V - 13.2 V

Temperature - Typical Value68°F

Temperature - SymbolTamb

Temperature - Maximum Ratings-20° C - +40° C (-4° F - +104° F)

Socket 8 - Pin 1+12 V (B)

Socket 11 - Pin 1Options

Socket 2 - Pin 3Serial Interface: TxD

Socket 10 - Pin 2Measurement Input 3

Socket 8 - Pin 2Measurement Input 1

Socket 7 - Pin 4GND Input

Socket 5 - Pin 3Options

Socket 5 - Pin 2Options

Socket 6 - Pin 2Profibus: a (internal)

Socket 10 - Pin 1+12 V (A)

Socket 2 - Pin 2Serial Interface: RxD

Socket 12 - Pin 2Profibus: a (internal)

Socket 12 - Pin 3Profibus: b (internal)

Socket 7 - Pin 2Serial Interface: TxD

Socket 5 - Pin 1Options

Socket 10 - Pin 4GND

Socket 1 - Pin 4Optocoupler Kathode

Socket 3 - Pin 3Serial Interface: TxD

Socket 3 - Pin 2Serial Interface: RxD

Socket 7 - Pin 3Serial Interface: RxD

Socket 8 - Pin 4GND

Socket 9 - Pin 3+8.2 V

Socket 4 - Pin 2Serial Interface: RxD

Socket 6 - Pin 3Profibus: b (internal)

Socket 4 - Pin 3Serial Interface: TxD

Socket 7 - Pin 1+12 V Input

Socket 4 - Pin 1+12 V (C)

Socket 9 - Pin 4GND

Socket 3 - Pin 4GND

Socket 3 - Pin 1+12 V (B)

Socket 4 - Pin 4GND

Socket 11 - Pin 3Options

Socket 9 - Pin 2Measurement Input 2

Socket 2 - Pin 4GND

Socket 1 - Pin 1Optocoupler Anode

Socket 11 - Pin 4Options

Socket 1 - Pin 2Relay Contact NO: a

Socket 5 - Pin 4Options

Socket 8 - Pin 3+8.2 V

Socket 1 - Pin 3Relay Contact NO: b

Socket 10 - Pin 3+8.2 V

Socket 11 - Pin 2Options

Socket 9 - Pin 1+12 V (C)

Socket 2 - Pin 1+12 V (A)

Socket 5 - Pin 3 (1)AB (Profibus: b [external])

Socket 11 - Pin 1 (1)AB

Socket 5 - Pin 3 (2)**

Socket 11 - Pin 4 (2)AB

Socket 5 - Pin 4 (2)**

Socket 11 - Pin 2 (2)**

Socket 5 - Pin 2 (1)AB (Profibus: a [external])

Socket 11 - Pin 4 (1)**

Socket 5 - Pin 1 (2)**

Socket 11 - Pin 1 (2)**

Socket 5 - Pin 2 (2)**

Socket 11 - Pin 3 (1)AB (Profibus: b [external])

Socket 11 - Pin 2 (1)AB (Profibus: a [external])

Socket 5 - Pin 4 (1)AB

Socket 5 - Pin 1 (1)AB

Socket 11 - Pin 3 (2)**

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.