R1700 Underground Mining Loader

Engine ModelCat® C13

Engine Power - Stage V Engine - ISO 14396:2002345hp

Engine Power - Tier 3 Engine - ISO 14396:2002361hp

Engine Power - VR Engine - ISO 14396:2002361hp

Note (1)Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard.

Note (2)Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard.

Note (3)All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications

Note (4)No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines.

Note (5)Optional Ventilation Reduction package available.

Note (6)Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.

Note (7)Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available.

Nominal Payload Capacity33069lb

Gross Machine Mass - Loaded138316lb

Static Tipping Load - Straight Ahead - Lift Arms Horizontal83218lb

Static Tipping Load - Full Turn - Lift Arms Horizontal69635lb

Breakout Force - Lift and Tilt53330lb

Operating Mass*95189lb

Operating Mass* - Front Axle38358lb

Operating Mass* - Rear Axle56831lb

Operating Mass + Rated Payload*128258lb

Operating Mass + Rated Payload* - Front Axle91412lb

Operating Mass + Rated Payload* - Rear Axle36846lb

Note*Calculated weights.

Forward - 13mile/h

Forward - 25.7mile/h

Forward - 310.2mile/h

Forward - 417.9mile/h

Reverse - 13.7mile/h

Reverse - 26.5mile/h

Reverse - 311.6mile/h

Reverse - 420.2mile/h

Raise6.8s

Dump3.3s

Lower, Empty, Float Down2.9s

Total Cycle Time13.2s

Bucket Capacities5.7-8.6 m³ (7.5-11.2 yd³)

Dump Bucket - 1 - Standard Bucket7.5yd³

Dump Bucket - 28yd³

Dump Bucket - 38.6yd³

Dump Bucket - 49.4yd³

Dump Bucket - 59.8yd³

Dump Bucket - 610.5yd³

Light Material Bucket11.2yd³

Ejector Bucket7.6yd³

Bolt Together Bucket (1)8.9yd³

Bolt Together Bucket (2)9.8yd³

Outside Clearance Radius272in

Inner Clearance Radius123.5in

Axle Oscillation8°

Articulation Angle44°

Tire Size26.5R25

Cooling System19.8gal (US)

Engine Crankcase9.8gal (US)

Hydraulic Tank35.7gal (US)

Fuel System128.4gal (US)

DEF Tank7.1gal (US)

Front Differential and Final Drive39gal (US)

Rear Differential and Final Drive37.2gal (US)

Transmission14.2gal (US)

Standard

Brakes, full hydraulic enclosed wet multiple-disc (SAFR)

Engine:
–Cat C13 6 cylinder, diesel
– Air-to-air aftercooler (ATAAC)

Filter, engine, remote mounted

Fuel priming aid

Pre-cleaner, engine air intake

Torque converter with automatic lock up clutch

Transmission:
– Electronic Clutch Pressure Control (ECPC)
– Automatic planetary power shift (4F/4R)
–Transmission neutralizer

Traction control

Optional

Engine options:
–Engine, Ventilation Reduction (VR)
–Engine, Stage 3
–Engine, Stage V

Park brake switch engagement – push to apply/pull to apply

Radiator, high efficiency

Reversible steering

Standard

Alarm, reversing

Alternator, 150 amp

Battery disconnect switch, ground level

Batteries, low maintenance

Diagnostic connector

Engine shutdown switch

Lighting LED
–External, front, rear
–Stop, dual

Receptacle group, auxiliary start

Starter, electric, 24-volt

Starting and charging system

Optional

Battery disconnect switch, in cab

Lighting LED:
–Service bay
–Truck loading

Switch isolation

Standard

Automatic Brake Application (ABA)

Cab, ROPS and/or Falling Object Protective Structure (FOPS) certified

Color Multi Purpose Display (CMPD):
–Front and rear brake gauges
–Transmission pressure
–System diagnostics

Control units, roof mounted (with service panel access)

Electrohydraulic implement controls (single joystick)

Horns, electric

Instrumentation/gauges:
–Speedometer/tachometer
–Fuel level
–Hydraulic oil temperature
–Engine coolant temperature

Light, warning, residual brake

Monitor, door latch

Mounts, radio and speaker (×2)

Operator Presence System

Seat:
–Seat, suspension, air
–Seat belt, retractable

Storage box, enclosed, 5 liter (3 gal)

Coat hook

Cup holder

Armrests and kneepads, independently adjustable

Optional

Operators station ROPS/FOPS enclosed

Camera, rear view

Seat:
–Seat, suspension, TEE, air
–Seat cover

Secondary Steering System

Standard

Tires must be selected from the Mandatory Attachments section (choose between):
–Tire, 26.5 × R25, VSMS2 Bridgestone
–Tire, 26.5 × R25, VSDL Bridgestone

Rims:
–Tubeless, set of 4

Optional

Rims:
–Spare, tubeless
–Rim identification numbering

Standard

Product Link^™ Elite – machine health and information

Optional

Command for Underground* – machine pre-requisites

Autodig, underground

Cat Production Measurement (CPM) Payload Weighing System

Tire monitoring

*Please consult with your regional commercial or technology representative prior to upgrading your machine to Command for Underground.

Standard

Brake axle cooling

Bucket dump (5.7 m3/7.5 yd3)

Bucket lip:
–Modular weld on

Decals, International Picto Graphics

Fenders, front, rear

Firewall

Fuel tap, manual shutoff

Guards, engine and transmission

Handholds

Handrails, quick release

Lift arm positioner for return to dig

Lubrication System:
–Semi central

Oil filter, transmission oil, long life

Operation and Maintenance Manual

Radiator grill, swing out

Wear bars:
–Fuel tank
–Hydraulic tank

Window:
–Window, single pane

Optional

Brake Release Arrangements, includes Steering Release:
–Recovery hook
–Recovery bar

Bucket:
–Various sizes, Dump (6.1 m3/8.0 yd3, 6.6 m3/8.6 yd3, 7.2 m3/9.4 yd3, 7.5 m3/9.8 yd3, 8.0 m3/10.5 yd3)
–Bolt-together (6.8 m3/8.3 yd3, 7.5 m3/9.8 yd3)
–Light material (8.6 m3/11.2 yd3)
–Ejector (5.8 m3/7.6 yd3)

Bucket lip:
–Bolt-on lip
–Durilock^™
–Lip fully welded or tack welded

Cutting edge:
–Modular weld on
–Bolt-on half arrow
–Durilock

Heel shrouds

Mechanically Attached Wear Plate System (MAWPS)

Wear bars, ejector and dump buckets

Wear liner

Fast Fill System:
–Coolant
–Engine oil
–Fuel
–Hydraulic oil
–Transmission oil

Fire Suppression System – Ansul, wet

Fluids:
–Arctic Fuel
–Arctic Coolant

Guards, light and window

Handrails, additional

Lifting Group, Mine Transfer

Lubrication System:
–Automatic

Reflective tape

Ride Control System

Service tools

Vandalism covers

Wear bars:
–Cab

Window:
–Window, dual pane