R1700G Underground Mining Loader

Engine ModelCat® C11

Engine Power - Tier 3 Engine - ISO 14396:2002345HP

Engine Power - VR Engine - ISO 14396:2002345HP

Bore5.1in

Stroke5.5in

Displacement680in³

Note (1)Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.

Note (2)All rating conditions are based on ISO/TR 14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications

Note (3)Engine derate will commence at an altitude of 3050 m (10,006 ft).

Note (4)Optional Ventilation Reduction package available.

Note (5)Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.

Nominal Payload Capacity27558lb

Nominal Payload Capacity - Truck Loading27558lb

Nominal Payload Capacity - Tramming30865lb

Gross Machine Mass - Truck Loading116845lb

Gross Machine Mass - Tramming120151lb

Static Tipping Load - Straight Ahead - Lift Arms Horizontal70065lb

Static Tipping Load - Full Turn - Lift Arms Horizontal57995lb

Breakout Force - SAE46051lb

Engine Crankcase - With Filter8.98gal (US)

Hydraulic Tank33gal (US)

Cooling System16.6gal (US)

Front Differential and Final Drives23.8gal (US)

Rear Differential and Final Drives23.8gal (US)

Fuel Tank150.3gal (US)

Secondary Fuel Tank - If Equipped117.8gal (US)

Transmission12.4gal (US)

Empty84878lb

Empty - Front Axle37346lb

Empty - Rear Axle47532lb

Loaded112436lb

Loaded - Front Axle81741lb

Loaded - Rear Axle30695lb

Loaded - Tramming115743lb

Raise6.8s

Dump2.9s

Lower, Empty, Float Down2.4s

Total Cycle Time12.1s

Bucket Capacity4.6-8.8 m³ (6.0-11.5 yd³)

Dump Bucket - 16yd³

Dump Bucket - 26.5yd³

Dump Bucket - 3 - Standard Bucket7.5yd³

Dump Bucket - 48.6yd³

Dump Bucket - 59.5yd³

Dump Bucket - 611.5yd³

Ejector Bucket7.5yd³

Outside Clearance Radius**270.8in

Inner Clearance Radius**127.1in

Axle Oscillation8°

Articulation Angle44°

Note**Clearance Dimensions are for reference only.

Forward - 12.9mile/h

Forward - 25.2mile/h

Forward - 38.9mile/h

Forward - 415mile/h

Reverse - 13.4mile/h

Reverse - 25.8mile/h

Reverse - 310.2mile/h

Reverse - 415.7mile/h

Tire Size26.5 × 25

StandardsROPS/FOPS Certified Cab

Standard

12V Power Supply in Cab

Alternator, 95-amp

Auxiliary Start Receptacle

Battery Disconnect Switch, Ground Level

Circuit Breaker, 80-amp

Corrosive Protection Spray

Diagnostic Connector

Electric Starting, 24-volt

Engine Shutdown Switches
– Rear Right Hand Side

External Lighting System, Front, Rear, Halogen Work Lights

Low Maintenance Batteries

Reversing Alarm

Starting and Charging System

Standard

Cat Electronic Monitoring System (Cat EMS)

Electric Horns

Gauges
– Engine Coolant Temperature
– Transmission Coolant Temperature
– Hydraulic Oil Temperature
– Fuel Level
– Speedometer
– Tachometer

Indicator Lights
– Alert Warning Light
– Residual Brake Pressure

Low Hydraulic Level Warning

Open Operator Station ROPS/FOPS Structure

Operator Presence System (Auto Park Brake)

Pilot Hydraulic Implement Controls, Single Joystick

Push Button Panel for Lights

Suspension Seat with Retractable Seat Belt

STIC Steering

Standard

Cat C11 Diesel Engine, ATAAC, 6 Cylinder

Brake Axle Cooling

Electric Fuel Priming Pump

Engine Air Intake Precleaner

Engine Oil Filter, Remote Mounted

Fuel System Manual Shut Off Tap

Heat Shields

Long Life Coolant

Planetary Powershift Transmission with Automatic Shift Control, 4 Speed Forward/4 Speed Reverse

Radiator, Cross Flow

Radiator Cap Manual Release

Rims, 5-Piece, Tubeless

SAFR^™ Full Hydraulic Enclosed Wet Multiple-Disc Brakes

Torque Converter

Transmission Neutralizer

Transmission Filter Drain Tap

Standard

Brake Light

Bucket Control Group, Standard

Bucket, Dump

Bucket Lip

Bucket Positioner, Return To Dig

Catalytic Exhaust Purifier/Muffler Group

Decals, International Picto Graphics

Engine and Transmission Belly Guards

Fenders, Front, Rear

Firewall

Fuel Lines Double Braided (Stainless Sleeving)

Hand Hold (Access On/Off Top Deck)

Hydraulic Oil Cooler – Swing Out Rear Frame

Operation and Maintenance Manual – English and other applicable local languages to select

Protection Wear Bars 100 × 50 mm (4 × 2 in)

Rims, 5-Piece, Tubeless

Semi Centralized Lubrication Points

S·O·S Port
– Coolant
– Engine Oil
– Hydraulic Oil
– Transmission Oil

Swing Out Radiator Grill

Tires and Rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

Optional

Battery and Engine Shutdown Switch
– Ground Level Isolation, In Cab Isolation Switch

Brake Pressure Gauges

Brake Release Arrangements, (Requires Lines Steering Release)
– Recovery Hook
– Recovery Bar

Buckets
– Bucket, Light Weight Material (8.8 m³/11.5 yd³) (Requires Control Group, Heavy Duty)
– Ejector Bucket Installed
– Various Sizes, Dump (4.2 m³/5.5 yd³ to 7.3 m³/9.5 yd³), Ejector (5.7 m³/7.5 yd³)

Bucket, Control Group, Heavy Duty (Required for Light Weight Buckets)

Bucket Hardware
– Cutting Edge, Bolt-On Half-Arrow (BOHA)
– Cutting Edge, Cat Weld-on
– Cutting Edge, Half Arrow, Flat
– Heel Shrouds, Ejector and Dump Buckets
– Mechanically Attached Shrouds (MAS)
– Mechanically Attached Wear Plate System, Cutting Edge Protection (MAWPS)
– Mechanically Attached Wear Plate System, Bottom Protection (MAWPS)
– Protector Pads (Bottom of Bucket)
– Wear Bars, Ejector and Dump Buckets
– Wear Liner (5.7 m³/7.5 yd³ Dump Bucket)

Bucket Lip
– Lip Fully Welded or Tack Welded
– Lip Bare (No Hardware)
– Bolt-On Ready
– MAS Ready (Mechanically Attached Shrouds)

Camera, Color Rear Facing

Cover, Anti Vandalism for Shipping

Draw Bar Attachment, Bolt-on

Engine Options
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)

• DPF (Flow Through) Filter

Fast Fill System
– Coolant
– Engine Oil
– Fuel (Single or Dual Tanks)
– Hydraulic Oil
– Transmission Oil

Fire Suppression System
– Ansul, Dry Powder
– Foam, Water Based

Front Light Protectors

Fuel System
– Dual Fuel Tanks

Guards
– Guard, Rear Side Quarter Window
– Guard Duo Cone Seal

Handrails
– Fold Down

Hydraulic System
– Ejector Bucket Ready
– Alternate Implement/Pilot Control Configuration

Lubrication System
– Automatic
– Centralized

Lighting
– External Lighting System, Front, Rear, LED Work Lights

Mine Transfer
– Mine Transfer Ready Rear Frame (Tack Welded)
– Lifting Group, Mine Transfer

Operators Station ROPS/FOPS Enclosed
– Air Conditioning
– Cab Pressurizer and Filter
– Duct, Window Demister
– Dome Light
– Heater
– Radio Ready Compartment for Radio and Speakers
– Strut, Cab Door

Operators Station FOPS Open
– Removable Canopy

Park Brake Switch Engagement
– Push to Apply
– Pull to Apply

Payload Control System
– Loadrite L2180

Remote Control Interface (excludes Transmitter and Receiver)
– Cattron
– RCT

Reversible Steering

Reflective Tape

Ride Control System

Rim
– Rim Identification Numbering
– Spare (Tube or Tubeless)
– Tube Type

Seats
– Seat Covers, Tee, Air and Standard
– Suspension Seat Tee, Vinyl
– Suspension Seat Tee, Air
– Suspension Seat Air Vinyl

Secondary Steering System

Service Tools
– Recovery Bar (for use with Brake Release, Recovery Bar System)
– Reference Parts Manual for Additional Tooling Available

Switches
– Additional Engine Shutdown, Mounted LHS
– Engine Shutdown, Fire Suppression Activation
– Idle Timer
– Engine Shutdown/Idle Timer
– Transmission Neutralizer Override Switch

Technology
– Command for Underground
– Vital Information Management System (VIMS) Gen 3

Tire Arrangements
– Tire, 26.5 × R25, VSMS2 L5 Bridgestone
– Tire, 26.5 × 25, VSDL, Bridgestone
– Tire, 26.5 × 25, 32 Ply, Goodyear

Wear Protection Bars
– Cab/ROPS
– Hydraulic Tank
– Radiator
– Wear Plate, Rear Underneath

NOTE: Not all features are available in all regions. See your Cat dealer for more information.