Engine ModelCat® C11
Engine Power - Tier 3 Engine - ISO 14396:2002316HP
Bore5.1in
Stroke5.5in
Displacement680in²
Note (1)Power ratings apply at a rated speed of 2,100 rpm when tested under the reference conditions for the specified standard.
Note (2)Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (3)Engine derate will commence at an altitude of 3353 m (11,000 ft).
Nominal Payload Capacity48501lb
Gross Machine Mass97488lb
Body Capacities9-12 m³ (11.8-15.7 yd³)
Empty47042lb
Empty - Front Axle35752lb
Empty - Rear Axle11290lb
Loaded97488lb
Loaded - Front Axle46747lb
Loaded - Rear Axle50742lb
Empty - Front Axle76.00%
Empty - Rear Axle24.00%
Loaded - Front Axle48.00%
Loaded - Rear Axle52.00%
Forward - 13.5mile/h
Forward - 26.7mile/h
Forward - 39.9mile/h
Forward - 415.7mile/h
Reverse - 13.5mile/h
NoteMaximum travel speeds with standard 18.00 × R25 tires.
Differential Ratio5.429
Final Drive Ratio4.765
Total Reduction Ratio25.87
Raise13s
Lower14s
Total Cycle Time27s
Body 1 - Standard Body11.8yd³
Body 213.1yd³
Body 314.4yd³
Body 415.7yd³
Ejector Body12.7yd³
NoteHeaped SAE 2:1.
Outside Clearance Radius294in
Inner Clearance Radius161.2in
Frame Oscillation±10°
Articulation Angle45°
Engine Crankcase - With Filter7.1gal (US)
Transmission5.3gal (US)
Hydraulic Tank38.3gal (US)
Cooling System15gal (US)
Front Differential and Final Drives11.6gal (US)
Rear Differential and Final Drives11.6gal (US)
Fuel Tank95gal (US)
Transfer Gear Box1.24gal (US)
Tire Size18.00 × R25
StandardsROPS/FOPS certified cab