Engine ModelCat® C27
Engine Power - EU Stage V Engine - ISO 14396:2002795hp
Bore5.4in
Stroke6in
Displacement1650in²
Note (1)Meets EU Stage V emission standards and U.S. EPA Tier 4 Final.
Note (2)Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (3)All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications
Nominal Payload Capacity138891lb
Gross Machine Operating Mass262218lb
Body Capacities26.9-38.3 m³ (35.2-50.1 yd³)
Empty115577lb
Empty - Front Axle81716lb
Empty - Rear Axle33861lb
Loaded254468lb
Loaded - Front Axle126669lb
Loaded - Rear Axle127800lb
Empty - Front Axle70.7%
Empty - Rear Axle29.3%
Loaded - Front Axle49.8%
Loaded - Rear Axle50.2%
Forward - 14.1mile/h
Forward - 25.7mile/h
Forward - 37.7mile/h
Forward - 410.3mile/h
Forward - 514mile/h
Forward - 618.9mile/h
Forward - 725.5mile/h
Reverse - 15.3mile/h
NoteMaximum travel speeds with standard 35 × 65 R33 tires.
Differential Ratio3.46:1
Final Drive Ratio5.5:1
Total Reduction Ratio19.04:1
Raise13s
Lower24s
Total Cycle Time37s
Dump Body - 1 - Standard35.2yd³
Dump Body - 242.6yd³
Dump Body - 344.2yd³
Dump Body - 447.9yd³
Dump Body - 5 (Light Material)50.1yd³
NoteHeaped SAE 2:1.
Outside Clearance Radius393.9in
Inside Turn Radius218.1in
Frame Oscillation10°
Articulation Angle42.5°
Engine Crankcase - With Filter25gal (US)
Transmission14gal (US)
Hydraulic Tank100.6gal (US)
Cooling System39.6gal (US)
Front Differential and Final Drives36.5gal (US)
Rear Differential and Final Drives36.5gal (US)
Fuel Tank237.7gal (US)
Tire Size35 × 65 R33
StandardsROPS/FOPS Certified Cab