Engine ModelCat® C32 ACERT™
Gross Power907HP
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995900HP
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249814HP
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995907HP
Emissions (Tier 2 Equivalent): Net Power ISO - 9249814HP
Rated Speed1750r/min
Bore5.7in
Stroke6.4in
Displacement1958in²
Peak Torque - 1,200 rpm3139lb/ft
Torque Rise30%
Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)Net torque rise meets SAE J139.
Note (3)No engine derating required up to 3050 m (10,000 ft) altitude.
Operating Weight224254lb
Transmission TypeCat Planetary Power Shift
Converter Drive - Forward 14.4mile/h
Converter Drive - Forward 27.7mile/h
Converter Drive - Forward 313.2mile/h
Converter Drive - Reverse 14.8mile/h
Converter Drive - Reverse 28.4mile/h
Converter Drive - Reverse 314.6mile/h
Direct Drive - Forward 1Lock-up disabled
Direct Drive - Forward 28.1mile/h
Direct Drive - Forward 314.2mile/h
Direct Drive - Reverse 15mile/h
Direct Drive - Reverse 28.9mile/h
Direct Drive - Reverse 315.6mile/h
NoteTravel speeds based on 45/65-45 L-5 46 ply tires.
Output at 1,850 rpm and 6900 kPa (1,000 psi)161gal/min
Cylinders, Double Acting - Lift, Bore and Stroke177 mm × 1760 mm (0.58 ft × 5.8 ft)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke267 mm × 286 mm (0.88 ft × 0.94 ft)
Relief Valve Setting - Lift (Large Pump)3289psi
Relief Valve Setting - Tilt (Small Pump)3560psi
Fuel Tank - Standard413gal (US)
Cooling System53gal (US)
Crankcase32gal (US)
Transmission45gal (US)
Differential - Final Drives - Front98gal (US)
Differential - Final Drives - Rear90gal (US)
Hydraulic System - Implement and Brakes - Tank Only81gal (US)
Hydraulic System - Steering and Engine Cooling Fan - Tank Only77gal (US)
FrontFixed
RearOscillating at ±10 degrees
Maximum Single-Wheel Rise and Fall22.6in
BrakesMeets ISO 3540:2011
Blade Capacities25 to 45 m³ (33 to 58 yd³)
Air ConditioningStandard air conditioning system contains environmentally friendly R134a refrigerant
Cab - ROPS/FOPS (1)Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Cab - ROPS/FOPS (2)SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
ROPSROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
FOPSFOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
Sound Performance (1)The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Sound Performance (2)The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
Sound Performance (3)Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Performance (4)The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).
Minimum Turning Radius31ft
Total Steering Angle86°
Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi)124gal/min
Relief Valve Setting5004psi
Serial Number PrefixKK6
Serial Number PrefixRM6
Height - Top of ROPS18.25ft
Height - Top of Exhaust Pipe17.17ft
Height - Top of Hood13ft
Ground Clearance27in
Centerline of Front Axle to Hitch9.67ft
Centerline of Rear Axle to Edge of Bumper13.75ft
Wheel Base19.25ft
Length - With Blade on Ground44ft