M314 Wheel Excavator

M314 Wheel Excavator

The Cat® M314 Wheel Excavator offers high performance with simple-to-use technologies to help boost operator efficiency. With easy-to-use controls, Cat tiltrotator (TRS) integration, a comfortable cab, and long service intervals, the M314 helps save you time and money.

Request a Quote

Engine Power - ISO 14396134hp

Engine Power - ISO 14396 (DIN)136hp (metric)

Engine ModelCat® C3.6

Net Power - ISO 9249127hp

Net Power - ISO 9249 (DIN)129hp (metric)

Bore3.9in

Stroke5in

Displacement221in³

Biodiesel CapabilityUp to B20¹

EmissionsMeets U.S. EPA Tier 4 Final, EU Stage V, and Korea Stage V emission standards.

Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advert

Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Operating Weight Maximum39680lb

Operating Weight Minimum32190lb

Note (1)Operating weight includes full fuel tank, operator, 500 kg (1,102 lb) bucket and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include a 2200 mm (7'3") stick and a 210 kg (463 lb) quick coupler.

Maximum Travel Speed23mile/h

Main System - Maximum Flow - Implement71.3gal/min

Maximum Pressure - Implement Circuit - Normal5076psi

Maximum Pressure - Implement Circuit - Heavy Lift5366psi

Maximum Pressure - Implement Circuit - Travel Circuit5076psi

Maximum Swing Speed*9.1r/min

Maximum Swing Torque30461lbf·ft

Note (1)*For CE-marked machine default value may be set lower

Fuel Tank77.9gal (US)

Diesel Exhaust Fluid (DEF)5.3gal (US)

Cooling System5.3gal (US)

Hydraulic Tank23.8gal (US)

Hydraulic System - Including Tank58.1gal (US)

BoomVariable Adjustable Boom 5 m (16' 6")

Stick2.2 m (7' 3")

BucketGD 0.76 m³ (0.99 yd³)

Shipping Height - Top of Cab10.9ft

Shipping Length26.9ft

Support Point11.3ft

Tail Swing Radius7.1ft

Counterweight Clearance4.1ft

Ground Clearance1.1ft

Undercarriage Length16.1ft

Wheel Base8.2ft

BoomVariable Adjustable Boom 5 m (16' 6")

Stick2.2 m (7' 3")

BucketGD 0.76 m³ (0.99 yd³)

Digging Height32.1ft

Dump Height23ft

Maximum Digging Depth17.4ft

Maximum Vertical Wall Digging Depth13.9ft

Maximum Reach at Ground Line28.4ft

Stick Forces (ISO)15961lbf

Bucket Forces (ISO)23605lbf

Note (1)Range values are calculated with a GD bucket (CW-S) and CW-20S-D.4.N quick coupler with a tip radius of 1387 mm (4'7"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of 1224 mm (4'0").

NoteThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg (1.8 lb) of refrigerant, which has a CO2 equivalent of 1.144 metric tonnes (1.261 tons).

Recyclability91%

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

LED lights on boom and cab

Programmable time-delay LED working lights

Roading and indicator lights, front and rear

Maintenance free batteries

Centralized electrical disconnect switch

Optional

LED lights on chassis (left-hand, right-hand) and counterweight

Electrical refueling pump

Standard

Cat C3.6 single turbo diesel engine

Power mode selector

One-touch low idle with auto engine speed control

Automatic engine idle shutdown

52° C (125° F) high-ambient cooling capacity

Cold start capability -18° C (0° F)

Double element air filter with integrated pre-cleaner

Standard

Boom, stick, and bucket drift reduction valves

Automatic hydraulic oil warm up

Heavy lift mode

Optional

Boom/stick lowering check valves

Bucket cylinder check valves

One-slider joysticks

Two-slider joysticks

Joystick Steering

Standard

Rear and right-side-view cameras

Wide angle mirrors

Signal/warning horn

Lockable disconnect switch

Anti-skid plate and countersunk bolts on service platform

Optional

360° visibility

Travel alarm

Inspection lighting

2D E-fence

Cab avoidance

Standard

Scheduled Oil Sampling (S·O·S℠) ports

Integrated vehicle health management system

Optional

Automatic lubrication system for implement and swing system

Standard

VisionLink®

Remote Flash and Remote Troubleshoot

Optional

Cat Grade with 2D

Cat Grade with 2D with Attachment Ready Option (ARO)

Laser catcher

Cat Grade 3D Ready

Cat Grade Connectivity

Cat Grade with Assist

Cat Payload

Cat Tiltrotator (TRS) integration

Standard

All wheel drive

Automatic brake/axle lock

3300 kg (7275 lb) counterweight

Optional

9.00-20 14 PR, dual tires (South Korea only)

10.00-20 16 PR, dual tires

10.00-20, dual, solid rubber tires

300-80-22.5 dual pneumatic, spacerless tire (Europe only)

Standard

Sound-suppressed ROPS cab

Keyless push-to-start engine control

Height-adjustable console, infinite with no tool

High-Resolution 254 mm (10 in) LCD touchscreen monitor

Optional

Operator Protective Guard (OPG)

Openable two-piece front window (laminated)

Fixed one-piece front window (P5A classified)

Optional

4650 mm (15'3") One-Piece Boom (Europe, Aus-NZ only)

4400 mm (14'5") One-Piece Boom (South Korea only)

5028 mm (16'6") Variable Adjustable Boom

2200 mm (7'3") stick

2500 mm (8'2") stick

2900 mm (9'6") Drop Nose stick without bucket linkage (Europe only)

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.