it's catit's single

938M Waste Handler Small Wheel Loader

938M Waste Handler Small Wheel Loader

The Cat® 938M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Request a Quote

Maximum Gross Power188HP

Bore4in

Stroke5in

Displacement427in³

Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)1800r/min

Note (2)Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)649ft·lbf

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)664ft·lbf

Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)1600r/min

Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)173HP

Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)642ft·lbf

Engine ModelCat® C7.1

Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)627ft·lbf

Note (3)No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)188HP

EmissionsThe Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.

Note (1)*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)650ft·lbf

Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)628ft·lbf

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)186HP

Engine Power - ISO 14396188HP

Engine Power - ISO 14396 - Metric190HP

Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)190HP

Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)184HP

Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)183HP

Net Power (Standard Power Mode: Range 1-3*)1600r/min

Net Power (Performance Power Mode: Range 1-4)1800r/min

Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)176HP

Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)170HP

Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)170HP

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)172HP

Operating Weight41794lb

Operating Weight (1)17 258 kg (38,046 lb)**

Operating Weight (2)18 958 kg (41,794 lb)^

Note (2)^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.

Note (1)**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.

Bucket Capacities3.0-5.0 m3 (3.9-6.5 yd3)

ROPSISO 3471:2008

FOPSISO 3449:2005 LEVEL II

Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*101dB(A)

Note (1)* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl

Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*68dB(A)

Note (1)**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.

Full Turn Tip Load (1)9795 kg (21,594 lb)**

Note (2)^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.

Full Turn Tip Load (2)10 741 kg (23,679 lb)^

Air ConditioningThe air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Maximum Flow - Implement Pump - 4th Function Maximum Flow*42gal/min

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure4351psi

Relief Pressure - Tilt Cylinder4351psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure4061psi

Note (1)Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Maximum Flow - Implement Pump50gal/min

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)5.5/6.2 seconds

Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time9.7/10.6 seconds

Maximum Working Pressure - Implement Pump4061psi

Note (3)* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)2.7/2.7 seconds

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)1.5/1.7 seconds

Maximum Flow - Implement Pump - 3rd Function Maximum Flow*50gal/min

Lift Cylinder: Standard Lift Linkage - Stroke31.1in

Tilt Cylinder: Standard Lift Linkage - Rod Diameter3.5in

Lift Cylinder: Standard Lift Linkage - Rod Diameter2.6in

Tilt Cylinder: Standard Lift Linkage - Bore Diameter5.9in

Lift Cylinder: Standard Lift Linkage - Bore Diameter4.7in

Tilt Cylinder: Standard Lift Linkage - Stroke21.9in

Maximum Steering Torque - 0° (Straight Machine)42506ft·lbf

Maximum Steering Torque - 40° (Full Turn)31398ft·lbf

Maximum Working Pressure - Steering Pump3500psi

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed2.3s

Steering Cylinder, Double Acting - Bore Diameter3.1in

Steering Cylinder, Double Acting - Stroke15.7in

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited3.1s

Note (1)Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Steering Cylinder, Double Acting - Rod Diameter2in

Maximum Flow - Steering Pump34gal/min

Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Forward and Reverse - Range 28mile/h

Forward and Reverse - Range 425mile/h

Note*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).

Forward and Reverse - Range 317mile/h

Forward and Reverse - Range 1*1-13 km/h (0.6-8 mph)

Front Axle - Traction AidLocking differential

Note (1)Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Rear AxleOscillating

Note (3)Differential front locking axle can be engaged on the go at full torque up to 20 km/h (12.4 mph) on the 938M.

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65± 10.5 degrees

Rear Axle - Traction Aid - OptionalLimited slip differential

Rear Axle - Oscillation Angle by Tire Size - 23.5 R25± 7 degrees

Brakes - ServiceInboard wet disc

Note (2)Offset rims available to meet European roading requirements.

Brakes - ParkingSpring applied hydraulically released

Front AxleFixed

Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder± 7 degrees

Axles - Rear9.2gal (US)

Fuel Tank51.5gal (US)

Axles - Front9.2gal (US)

Transmission - Gear Box2.9gal (US)

Hydraulic System - Including Tank44.9gal (US)

Engine Crankcase5.3gal (US)

Diesel Exhaust Fluid (DEF) Tank5gal (US)

Cooling System8.5gal (US)

Hydraulic Tank23.8gal (US)

Recyclability94%

Standard

Axle Duo-Cone seal guards

Auto idle shut down feature

Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life)

Coded start (requires secondary display)

Differential lock in front axle

Enclosed wet disc full hydraulic brakes

Hydraulically driven demand cooling fan

Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed

Parking brake, electric

Single plane cooling package wide six fins per inch density

Oil sampling ports

Throttle lock and max speed limiter

Standard

Automatic lift lower and tilt kickouts, adjustable in-cab

Bucket and fork modes, adjustable in-cab

Cylinder damping at kickout and mechanical end stops

Fine mode control (fast, medium, slow)

Hydraulic response setting (fast, medium, slow)

Load sensing hydraulics and steering

Seat-mounted hydraulic joystick controls

Standard

Alternator, 115 amp, heavy duty

Batteries, 1,000 CCA (2) 24V system, disconnect switch

Back-up alarm

Emergency shutdown switch

Halogen work and roading lights, LED rear tail lights

Product Link PRO with three year subscription

Remote jump start post

Resettable main and critical function breakers

Standard

75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator

Automatic temperature control

Cab, pressurized

Camera, rearview

External heated mirrors with lower parabolic

Ground level cab door release

Hydraulic control lockout

Mirror, single

Lunch box storage

Radio ready speakers

Rear window defrost, electric

Column mounted multi function control – lights, wipers, turn signal

Tilt and telescopic steering wheel

Tinted front glass

Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal

Suspension seat, fabric

Standard

Large-access enclosure doors with adjustable close/open force

Cat optimized Z-bar linkage with parallel lift

Recovery hitch, with pin

Remote mounted lubrication points

Lockable compartments and enclosures

Optional

Autolube, integrated in secondary display

Auxiliary flow, third and fourth function

Differential, limited slip, rear

Beacon light, strobe

Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages)

Camera, roof mounted, front view with separate display

Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)

Counterweight, additional options

Coupler, (Fusion and ISO 23727)

Debris packages (low, medium, high)

Fenders (extended cover and full coverage)

Guarding packages

Linkage, high lift

Lights, auxiliary, halogen or LED with engine and DEF compartment lights

Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer

Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping

Radio packages

Rear Object Detection

Ride Control System, adjustable through secondary display

Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.

Steering
– Dual mode and secondary

Tire Pressure Monitoring (TPM)

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.