Engine Power @ 1,600 rpm - ISO 14396:2002321hp
Engine ModelCat C9.3B
Gross Power @ 1,600 rpm - SAE J1995:2014325hp
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011292hp
Net Power - ISO 9249292hp
Engine Torque @ 1,200 rpm - ISO 14396:20021314ft·lbf
Gross Torque @ 1,200 rpm – SAE J1995:20141327ft·lbf
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:20111234ft·lbf
Bore - ISO 92494.53in
Stroke5.87in
Displacement568in³
Note (1)Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, China Nonroad Stage IV, and Japan 2014 (Tier 4 Final) emission standards.
Note (2)The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (3)Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases on a lifecycle basis: • Up to B20 biodiesel (FAME) ** • Up to 100% HVO and GTL renewable fuels
Operating Weight*48018lb
Note (1)* For 4.0 m3 (5.2 yd3) general purpose bucket with BOCE.
Note (2)* Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Bucket Capacities3.2 - 7.1 m³ (4.25 - 9.25 yd³)
Static Tipping Load - Full 37° Turn - With Tire Deflection30072lb
Static Tipping Load - Full 37° Turn - No Tire Deflection32233lb
Breakout Force36974lbf
Note (1)* For 4.0 m3 (5.2 yd3) general purpose bucket with BOCE.
Note (2)* Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)75dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)110dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)78 dB(A)*
Note (1)*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**73dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**108 dB(A)***
Note (2)** For machines in European Union countries and in countries that adopt the “EU Directives”.
Note (3)*** European Union Directive “2000/14/EC” as amended by “2005/88/EC”.
Forward - 14mile/h
Reverse - 14.3mile/h
Forward - 27.5mile/h
Reverse - 28.2mile/h
Forward - 313mile/h
Reverse - 314.3mile/h
Forward - 421.6mile/h
Reverse - 422.9mile/h
NoteMaximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32 in) roll radius.
Fuel Tank84.5gal (US)
DEF Tank6.9gal (US)
Cooling System14gal (US)
Crankcase6.1gal (US)
Transmission14.5gal (US)
Differential - Final Drives - Front15.1gal (US)
Differential - Final Drives - Rear15.1gal (US)
Hydraulic Tank26.7gal (US)
Implement Pump TypeVariable Displacement Piston, Load Sensing
Implement System - Maximum Flow @ 2,275 rpm86gal/min
Implement System - Maximum Operating Pressure4047psi
Implement System - Maximum Flow 3rd Function63gal/min
Implement System - Maximum Operating Pressure 3rd Function3304psi
Hydraulic Cycle Time - Raise from Carry Position5.7s
Hydraulic Cycle Time - Lower, Empty, Float Down2.6s
Hydraulic Cycle Time - Total Cycle Time10.1s
ROPS/FOPSROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
BrakesBrakes meet ISO 3450:2011 standards
Height - Top of Hood9.2ft
Height - Top of Exhaust Pipe11.61ft
Height - Top of ROPS11.75ft
B-Pin Height13.11ft
Centerline of Rear Axle to Edge of Counterweight8.1ft
Ground Clearance1.49ft
Wheel Base11.65ft
Centerline of Rear Axle to Hitch5.82ft
Rack Back - Maximum Lift62°
Rack Back - Carry50°
Rack Back - Ground42°
Lift Arm Clearance12.16ft
Hydraulic Cycle Time - Dump, at Maximum Raise1.8s
Recyclability97%