Engine Power @ 1,600 rpm - ISO 14396:2002339hp
Gross Power @ 1,600 rpm - SAE J1995:2014342hp
Engine ModelCat C9.3B
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011321hp
Note (1)Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
Note (2)The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:20111316ft-lb
Engine Torque @ 1,200 rpm – ISO 14396:20021375lb/ft
Note (3)Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
Gross Torque @ 1,200 rpm – SAE J1995:20141388lb/ft
Displacement9.3 L
Operating Weight54858lb
NoteWeight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second
Bucket Range2.8-14.0 m³ 3.75-18.25 yd³
Forward - 14.1mile/h
Forward - 28.4mile/h
Forward - 315mile/h
Forward - 424.5mile/h
NoteMaximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.
Reverse - 14.5mile/h
Reverse - 29.2mile/h
Reverse - 316.5mile/h
Reverse - 424.5mile/h
Note (1)** For machines in European Union countries and in countries that adopt the EU Directives.
Note (2)***European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*108
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)69dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)109dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)76
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)70dB(A)
With Cooling Fan Speed at Maximum Value - NoteDistance of 15 m (49.2 ft), moving forward in second gear ratio.
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
Breakout Force44072lb
Note (1)For a machine configuration as defined under Weight.
Note (2)Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection17505kg
Static Tipping Load - Full 40° Turn - With Tire Deflection35919lb
Cooling System17.4gal (US)
Crankcase6.1gal (US)
DEF Tank6.9gal (US)
Differential - Final Drives - Front15.1gal (US)
Differential - Final Drives - Rear15.1gal (US)
Fuel Tank80.1gal (US)
Hydraulic Tank30.1gal (US)
Transmission15.5gal (US)
Implement System - Maximum Operating Pressure4496psi
Implement System - Maximum Pump Output at 2,250 rpm99gal/min
Hydraulic Cycle Time - Total10.7 seconds
NoteAll dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Centerline of Rear Axle to Edge of Counterweight8.1ft
Centerline of Rear Axle to Hitch5.1ft
Ground Clearance1.4ft
Height - Top of Exhaust Pipe11.8ft
Height - Top of Hood9.5ft
Height - Top of ROPS11.1ft
Hinge Pin Height at Carry2.6ft
Hinge Pin Height at Maximum Lift15.9ft
Lift Arm Clearance at Maximum Lift13.8ft
Overall Length - Without Bucket26.6ft
Tread Width7.3ft
Wheel Base11.8ft
Rack Back at Ground37 degrees
Rack Back - Maximum Lift71 degrees
Rack Back - Carry Height49 degrees
Width over Tires (Loaded)9.11ft
Centerline of Rear Axle to Hitch5.1ft
Ground Clearance420mm
Height - Top of Exhaust Pipe3527mm
Height - Top of Hood2846mm
Height - Top of ROPS3589mm
Hinge Pin Height at Carry2.2ft
Hinge Pin Height at Maximum Lift4464mm
Lift Arm Clearance at Maximum Lift3843mm
Overall Length - Without Bucket7731mm
Tread Width7.3ft
Wheel Base3550mm
Rack Back at Ground39 degrees
Width over Tires (Loaded)9.11ft
Centerline of Rear Axle to Edge of Counterweight8ft
Rack Back - Maximum Lift56 degrees
Rack Back - Carry Height49 degrees
