Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011393hp
Engine ModelCat C13
Gross Torque @ 1,200 rpm – SAE J1995:20141627lb/ft
Engine Torque @ 1,200 rpm – ISO 14396:20021612lb/ft
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:20111539lb/ft
Engine Power @ 1,700 rpm – ISO 14396:2002420hp
Gross Power @ 1,700 rpm – SAE J1995:2014425hp
Note (3)Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
Note (2)The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (1)Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards.
Operating Weight66877lb
NoteWeight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s
Bucket Range4.0-14.5 m³ 5.25-19 yd³
Forward - 14.4mile/h
Forward - 28.4mile/h
Forward - 314.9mile/h
Forward - 424.5mile/h
NoteMaximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
Reverse - 15mile/h
Reverse - 29.6mile/h
Reverse - 318.3mile/h
Note (1)For machines in European Union countries and in countries that adopt the EU Directives.
Note (2)European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*110
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)70dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)107dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)75
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)70dB(A)
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
Breakout Force51008lbf
Note (1)For a machine configuration as defined under Weight.
Note (2)Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection20965kg
Static Tipping Load - Full 40° Turn - With Tire Deflection43432lb
Cooling System13.7gal (US)
Crankcase9.8gal (US)
DEF Tank5.5gal (US)
Differential - Final Drives - Front24.3gal (US)
Differential - Final Drives - Rear24.3gal (US)
Fuel Tank112.5gal (US)
Hydraulic Tank40.4gal (US)
Transmission20.3gal (US)
Implement System - Maximum Operating Pressure4975psi
Hydraulic Cycle Time - Total10.1 seconds
NoteAll dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Centerline of Rear Axle to Edge of Counterweight8.9ft
Centerline of Rear Axle to Hitch6.3ft
Ground Clearance1.5ft
Height - Top of Exhaust Pipe12.5ft
Height - Top of Hood10.1ft
Height - Top of ROPS12.7ft
Hinge Pin Height at Carry2.2ft
Hinge Pin Height at Maximum Lift15.7ft
Lift Arm Clearance at Maximum Lift13.6ft
Overall Length - Without Bucket27.5ft
Tread Width8ft
Wheel Base12.6ft
Width over Tires (Loaded)10.9ft
Centerline of Rear Axle to Edge of Counterweight8.7ft
Centerline of Rear Axle to Hitch6.3ft
Ground Clearance456mm
Height - Top of Exhaust Pipe3764mm
Height - Top of Hood3064mm
Height - Top of ROPS3829mm
Hinge Pin Height at Carry2ft
Hinge Pin Height at Maximum Lift4554mm
Lift Arm Clearance at Maximum Lift3881mm
Overall Length - Without Bucket8155mm
Tread Width8ft
Wheel Base3800mm
Width over Tires (Loaded)10.9ft
Recyclability98%
