Net Power373HP
Engine ModelCat® C15 ™
EmissionsU.S. EPA Tier 4 Final/EU Stage V, or China Nonroad Stage III and Brazil MAR-1 and equivalent to U.S. Tier 3 and EU Stage IIIA
Gross Power - ISO 14396449HP
Peak Power Speed - 1,600 rpm - SAE J1995456HP
Peak Power Speed - 1,600 rpm - SAE J1995 (DIN)462HP
Peak Power Speed - 1,600 rpm - ISO 14396449HP
Peak Power Speed - 1,600 rpm - ISO 14396 (DIN)455HP
Rated Speed - 2,000 rpm - EEC 80/1269373HP
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)378HP
Rated Speed - 2,000 rpm - ISO 9249373HP
Rated Speed - 2,000 rpm - ISO 9249 (DIN)378HP
Rated Speed - 2,000 rpm - SAE J1349373HP
Rated Speed - 2,000 rpm - SAE J1349 (DIN)378HP
Bore5.4in
Stroke6.75in
Displacement927in³
Peak Torque - 1,200 rpm - SAE J19951778lb/ft
Torque Rise16%
Operating Weight116688lb
Bucket Capacities5.4 m³ (7 yd³)
Transmission TypeCat-Planeten-Lastschaltgetriebe
Forward - 15mile/h
Forward - 28mile/h
Direct Drive - Forward 28mile/h
Direct Drive - Forward 314mile/h
Direct Drive - Forward 424mile/h
Reverse - 15mile/h
Reverse - 28mile/h
Direct Drive - Reverse 29mile/h
Direct Drive - Reverse 316mile/h
Direct Drive - Reverse 425.4mile/h
Lift/Tilt System - CircuitLoad Sense
Lift/Tilt System - Pump2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm123gal/min
Relief Valve Setting - Lift/Tilt4050psi
Lift Cylinder - Bore7.5in
Lift Cylinder - Stroke45in
Tilt Cylinder - Bore6.7in
Tilt Cylinder - Stroke22.4in
Rack Back4.5s
Raise8.5s
Dump3s
Lower4.9s
Lower Float Down4.3s
Total Hydraulic Cycle Time15.8s
Fuel Tank116gal (US)
Cooling Systems26gal (US)
Crankcase9gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only)6gal (US)
Transmission20gal (US)
Axle Oil - Differentials and Final Drives - Front49gal (US)
Axle Oil - Differentials and Final Drives - Rear45gal (US)
Hydraulic System Factory Fill87gal (US)
Hydraulic System - Tank Only34gal (US)
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
FrontFixed
RearTrunnion
Oscillation Angle±12.5°
Oscillation Angle - Chain Arrangement±8.5°
BrakesISO 3450: 2011
ISO 5010:2007 - Steering System - CircuitLoad Sense
ISO 5010:2007 - Steering System - PumpPiston, variable displacement
ISO 5010:2007 - Maximum Flow at 1,400 rpm52gal/min
ISO 5010:2007 - Steering Cutoff Pressure4000psi
ISO 5010:2007 - Total Steering Angle70°
ROPS/FOPSROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Operator Sound Level (ISO 6396)72dB(A)
Machine Sound Level (ISO 6395)112dB(A)
Note
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
Operator Sound Level (ISO 6396)72dB(A)
Machine Sound Level (ISO 6395)110dB(A)
Note
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
Ground to Top of ROPS13.5ft
Ground to Top of Exhaust Stacks13.3ft
Ground to Top of Hood10.7ft
Ground to Center of Rear Axle3.2ft
Ground to Fuel Tank Clearance2.3ft
Ground to Lower Hitch Clearance1.5ft
Reach at Maximum Lift8ft
Clearance at Maximum Lift10.7ft
B-Pin Height at Maximum Lift15ft
Maximum Overall Height, Bucket Raised20.9ft
Rear Axle Center Line to Bumper10.3ft
Wheel Base12.5ft
Maximum Overall Length35ft
Front Axle Centerline to Bucket Tip12.2ft
Ground to Top of ROPS13.5ft
Ground to Top of Exhaust Stacks13.3ft
Ground to Top of Hood10.7ft
Ground to Center of Rear Axle3.2ft
Ground to Fuel Tank Clearance2.3ft
Ground to Lower Hitch Clearance1.5ft
B-Pin Height at Maximum Lift15ft
Rear Axle Center Line to Bumper10.3ft
Wheel Base12.5ft
Maximum Overall Length35.4ft
Front Axle Centerline to Bucket Tip12.6ft