Standard
EMCP4.2B controls including: Emergency stop pushbutton
RPM
Engine cool-down timer
EMCP4.2B controller including:
Accessory module data link
4 programmable relay outputs (Form A)
Communications:
Volts (L-L & L-N)
Over / under frequency (81 o / u)
Text alarm / event descriptions
Auto / start / stop control
Speed adjust
kVA (per phase, average & percent)
Overcurrent (50 / 51)
Alarm acknowledge
Environmental sealed front face
6 programmable digital inputs
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Generator phase sequence
2 Programmable digital outputs
Low coolant temperature
Controls:
Serial annunciator module data link
Reverse Power (kW) (32)
Lamp test
Coolant temperature
Engine cycle crank
kVAr-hr (total)
2 Programmable relay outputs (Form C)
Generator mounted - rear facing
24-volt DC operation
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
kW (per phase, average & percent)
Reverse Reactive Power (kVAr) (32RV)
Programmable protective relaying functions:
Digital indication for:
High coolant temperature
Low oil pressure
Overspeed
Over / under voltage (27 / 59)
Customer data link (Modbus RTU)
DC volts
Operating hours
Low coolant level
kW-hr (total)
Frequency (Hz)
Emergency stop
Power Factor (per phase & average)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
Optional
Auxiliary Boxes
Customer connection mounting locations
Ground (Automatically selected)
Vandle proof panel door
Customer Interface Options
Mounting Group - External Box Clips
Remote speed adjust
Generator Temperature Monitoring
Governors
Annunciator Modules
Local PC monitoring
