Standard
Serial annunciator module data link
Accessory module data link
2 Programmable digital outputs
Overspeed
Low coolant level
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
24 Volt DC operation
2 Programmable relay outputs (Form C)
Auto / start / stop control
Speed adjust
DC volts
Reverse Reactive Power (kVAr) (32RV)
kVA (per phase, average & percent)
6 programmable digital inputs
Low oil pressure
Text alarm / event descriptions
Volts (L-L & L-N)
Emergency stop
4 programmable relay outputs (Form A)
Programmable protective relaying functions:
Co olant temperature
Reverse Power (kW) (32)
kVAr-hr (total)
Customer data link (Modbus RTU)
Generator mounted - rear facing
Over / under frequency (81 o/u)
High coolant temperature
Engine cool-down timer
EMCP4.2 controls including:
Engine cycle crank
kW (per phase, average & percent)
Lamp test
Generator phase sequence
Failure to start (overcrank)
Operating hours
Warning / shutdown with common LED indication of shutdowns for:
Environmental sealed front face
Emergency stop pushbutton
RPM
Frequency (Hz)
Low coolant temperature
kVAr (per phase, average & percent)
Alarm acknowledge
kW-hr (total)
Over / under voltage (27 / 59)
Power Factor (per phase & average)
Overcurrent (50 / 51)
Digital indication for:
True RMS AC metering, 3 phase, +/-2% accuracy
Communication:
Controls:
Generator mounted - rear facing
Low coolant level
Communications
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for:
Controls:
2 Programmable digital outputs
Low coolant temperature
EMCP4.2 controller including:
Over/Under Frequency (81 o/u)
kW-hr (total)
Text alarm / event descriptions
Environmental sealed front face
RPM
Digital indication for:
Emergency stop
Serial annunciator module data link
kVA (per phase, average & percent)
Alarm acknowledge
kVAr-hr (total)
Auto / start / stop control
kW (per phase, average & percent)
Engine cool-down timer
True RMS AC metering, 3-phase, +/-2% accuracy
Failure to start (overcrank)
Over/Under voltage (27/59)
EMCP4.2 controls including: Emergency stop pushbutton
Low oil pressure
24-volt DC operation
Volts (L-L & L-N)
Oil pressure (psi, kPa or bar)
Reverse Power (kW) (32)
Overcurrent (50/51)
6 programmable digital inputs
Reverse Reactive Power (kVAr) (32RV)
Generator phase sequence
Operating hours
High coolant temperature
Overspeed
Accessory module data link
2 Programmable relay outputs (Form C)
Frequency (Hz)
Coolant temperature
Customer data link (Modbus RTU)
Lamp test
Power Factor (per phase & average)
4 programmable relay outputs (Form A)
Speed adjust
Amps (per phase & average)
Programmable protective relaying functions:
DC volts
Engine cycle crank