C13 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote

Maximum Rating400 ekW

Minimum Rating320 ekW

Emissions/Fuel StrategyLow Fuel Consumption

Voltage380 to 415 Volts

Frequency60 Hz

Speed1800 rpm

Duty CycleStandby, Prime

Engine ModelC13 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore5.12in

Stroke6.18in

Displacement762.8in³

Compression Ratio16.3:1

AspirationAir to Air Aftercooled

Fuel SystemMEUI

Governor TypeAdem™A4

Length - Maximum186.7in

Width - Maximum79.3in

Height - Maximum84in

Standard

Aftercooler core

Air cleaner; light duty with disposable paper filter

Turbocharger

Optional

Single element air cleaner

Dual element air cleaner

Standard

GCCP 1.3

Standard

Caterpillar extended life coolant

Coolant drain line with valve

Fan drive, battery charging alternator drive

Radiator and cooling fan with guard

Optional

Stone guards

Radiator duct flange

Low coolant temperature alarm

Standard

Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use - shipped loose

Optional

6 and 8 inch elbow kit

Flexible 8 inch exhaust fittings

6 and 8 inch flange GP

Mufflers - End in/end out

10, 25 and 35 dBA attenuation

Standard

Base, formed steel with single wall integral 8-hour fuel tank

Standard open set fuel tank/base supplied

Optional

Manual fuel transfer pump

Integral dual wall fuel tank base

Fuel transfer system controls

Standard

Segregated low voltage (AC/DC) wiring panel

Power center, IP22

Integrated voltage regulator (IVR)

Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre

A Frame generator - IP21 Protection

Optional LC Frame generator - IP23 Protection

Optional

Permanent magnet excitation (PMG) generator

LC frame generator

LC CIP generator

A Frame CIP generator

A Frame oversize generator

Ingress protection

Space heaters

Standard

Cat electronic governor (ADEM A4)

Standard

Service indicator

Radiator package mounted

Low coolant level sensor

Coolant drain line with valve

Coolant level sight gauge

Disposable air filter

Standard

Lubricating oil

Oil drain valves

Oil cooler

Optional

Manual sump pump

Standard

Captive linear vibration isolators between base and engine-generator

Includes lifting provisions and termination points for coolant and lube oil drain lines

Optional

Narrow skid base

Standard

24V battery with rack and cables

Standard

Engine and alternator pre-paint, Caterpillar yellow

Optional

EU Certificate of Conformance (CE)

Global Certification for CIS

Optional

4 Pole (IEC-100% rated) Circuit breaker

Circuit breaker (IEC) Auxiliary contacts

4 Pole (IEC-100% rated) Circuit breaker - Motorised

Padlockable circuit breaker device

Power terminal strip

Shunt trip for IEC circuit breaker

3 Pole (IEC-100% rated) Circuit breaker

3 Pole (IEC-100% rated) Circuit breakers - Motorised

Optional

GCCP 1.4

Local alarm modules: Local annunciator

Volt free contacts

Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor

Remote annunciator module

Optional

Sound attenuated enclosures

High ambient sound attenuated enclosures

Optional

5 Amp single Battery charger

Jacket water heater

Battery disconnect switch

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.