C4.4 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote

Maximum Rating60 ekW

Minimum Rating36 ekW

Emissions/Fuel StrategyU.S. EPA Cert., Tier 3

Voltage208 to 600 Volts

Frequency60 Hz

Speed1800 rpm

Duty CycleStandby, Prime

Engine ModelC4.4, In-line 4, 4-cycle diesel

Bore4.13in

Stroke5in

Displacement268.5in

Compression Ratio18.2:1

AspirationTurbocharged

Fuel SystemElectronic (adjustable)

Governor TypeAdem™A4

Length - Maximum75.8in

Width - Maximum44.1in

Height - Maximum53.6in

Standard

IBC seismic and wind Certifications

Optional

IBC seismic and wind Certifications

Standard

NFPA battery charger UL10A 120VAC

Optional

NFPA battery charger UL10A 120VAC

Standard

Air cleaner

Cartridge type air filter

Optional

Cartridge type air filter

Standard

Second circuit breaker box

3-Pole 100% rated

Power terminal strip

Breakers (100% UL rated)

Optional

3-Pole 100% rated

Breakers (100% UL rated)

Second circuit breaker box

Power terminal strip

Standard

1000028996

Standard

Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Optional

10, 25 and 35 dBA silencer systems

Overhead silencer mounting kit

Standard

Standard open set fuel tank/base supplied base, formed steel with single wall integral 8-hour fuel tank

Optional

5 Gallon fill containment

Tank riser

209 and 394 gallon sub-base fuel tanks

Emergency vent pipe

5 Gallon spill containment

Standard

Coolant drain line with valve

Radiator and cooling fan with guards

Fan drive, battery charging alternator drive

Caterpillar extended life coolant

Radiator stone guard

Optional

Radiator transition flange

Standard

12 Leads

Standard

Mechanical and electrical governing system - model dependent

Standard

Oil drain line with valve

Lubricating oil

Standard

WCA1 Low coolant temperature alarm

WSS1 Low coolant level shut down

FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected

NFPA110 bundle includes:

PAA1 Panel mounted audible alarm

A Coolant heater, remote annunciator or 0.8 power factor test may be required depending on the application

Oil temperature gauge and sender

PBC10NU NFPA battery charger

Ground fault relay

Discrete I/O module

Volt free contacts genset run and common alarm

Audible alarm

Remote E-stop button

Remote annunciator module

Low coolant temperature alarm

Protective devices:

Overload shutdown via breaker

Fuel level reading

Low coolant level shutdown

Optional

Discrete I/O module

Remote annunciator module

Remote E-stop button

Protective devices: Low coolant temperature alarm - Low coolant level shutdown - Fuel level reading - Overload shutdown via breaker

Ground fault relay

Audible alarm

Oil temperature gauge and sender

Volt free contacts genset run and common alarm

NFPA110 bundle includes: FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected - WSS1 Low coolant level shut down - WCA1 Low coolant temperature alarm - PAA1 Panel mounted audible alarm - PBC10NU NFPA battery charger - A Coolant heater ,remote annunciator or 0.8 power factor test may be required depending on the application

Standard

Engine and alternator pre-paint, Caterpillar yellow

Standard

24V battery with rack and cables

Batteries

Optional

R Frame auxilliary winding

Optional

Coolant heater

Battery heater

Anti-condensation heater

Lube oil sump heater

Jacket water heater

Wiring for canopy space heater

Optional

Panel viewing window

External emergency stop

Sound attenuated enclosure, Level 2

Weatherproof enclosure

Sound attenuated enclosure, Level 1

Optional

Seismic vibration isolators

Optional

Generator test report

PGS Test report @ 0.8 power factor

4 Hour factory test

PGS Test report @ 1.0 power factor

Optional

Permanent magnet excitation (PMG) generator

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.