C9 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote

Maximum Rating300 ekW

Minimum Rating180 ekW

Emissions/Fuel StrategyLow Fuel, Tier 3

Voltage220 to 480 Volts

Frequency60 Hz

Speed1800 rpm

Duty CycleStandby, Prime

Engine ModelC9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore4.41in

Stroke5.87in

Displacement537.01in³

Compression Ratio16.1:1

AspirationAir to Air Aftercooled

Fuel SystemHydraulic electronic unit injection

Governor TypeAdem™A4

Length - Maximum157in

Width - Maximum47.5in

Height - Maximum73.5in

Standard

Turbocharger

Air cleaner, light duty with disposable paper filter

Aftercooler core

Standard

Exhaust manifold - dry

Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use - shipped loose

Optional

5 - 6 inch flange adaptor

6 inch flange

Mufflers - End in/end out; 10 dBA or 25 dBA attenuation

5 and 6 inch elbow kits

Standard

GCCP 1.3

Optional

Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; overload shutdown via breaker ; Low fuel level shutdown ; Low fuel level alarm ; Fuel level sensor

Control panel Options: GCCP 1.4 ; Volt free contacts ; Local alarm horn ; Oil temperature displays

Standard

Caterpillar extended life coolant

Fan drive, battery charging alternator drive

Coolant drain line with valve

Radiator and cooling fan with guard

Optional

Radiator duct flange

Low coolant temperature alarm

Standard

Standard open set fuel tank/base supplied

Fuel cooler

Primary fuel filter w/integral water separator and secondary filter

Base, formed steel with single wall integral 8-hour fuel tank

Fuel priming pump

Optional

Integral dual wall fuel tank base

Standard

Mandatory option circuit breaker, IEC, 3 pole mounted in power centre

IP23 Protection

12 Leads

Segregated low voltage (AC/DC) wiring panel

Insulation Class H and temperature rise

Power centre, IP22

Brushless, self-excited 2/3 pitch, random wound

Voltage regulator (single phase sensing)

Standard

Cat electronic governor (ADEM A4)

Standard

Captive linear vibration isolators between base and engine-generator

Includes lifting provisions and termination points for coolant and lube oil drain lines

Optional

Narrow skid base

Standard

24V battery with rack and cables

Optional

Jacket water heater

5 Amp single Battery charger

Battery disconnet switch

Standard

Engine and alternator re-paint, Caterpillar yellow

Standard

Oil cooler

Oil drain valves

Fumes disposal, piped to front of radiator

Lubricating oil

Oil filter and dipstick

Oil drain lines with valve; piped to edge of base

Optional

European Certificate for Conformance

Global Certification for CIS

Optional

Single element air cleaner

Optional

4 Pole (IEC-100% rated) Circuit breaker upgrades: 400, 630, 800 and 100 amps

Optional

High ambient sound attenuated enclosure

Sound attenuated enclosure

Optional

Permanent magnet excitation (PMG) generator

Oversize, AREP, CIP generators

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.