D400 GC (60 Hz) Generator Set

Maximum Rating400 ekW

Minimum Rating400 ekW

Emissions/Fuel StrategyEPA Stationary Emergency

Voltage480 to 600 Volts

Frequency60 Hz

Speed1800 rpm

Duty CycleStandby

Engine ModelCat® C13 In-line 6, 4-cycle diesel

Bore5.1in

Stroke6.2in

Displacement763in³

Compression Ratio16.3:1

AspirationTurbocharged Air-to-Air Aftercooled

Fuel SystemMEUI

Governor TypeADEM™A4

Length - Maximum182.8in

Width - Maximum64.2in

Height - Minimum80.3in

Height - Maximum96.7in

Dry Weight - Genset (minimum)7330.4lb

Dry Weight - Genset (maximum)4107lb

Standard

Air cleaner - Non canister, disposable

Aftercooler core

Turbocharger

Optional

Air cleaner (Non canister disposable)

Standard

GCCP 1.2

Standard

Blower fan and fan drive with guards

Coolant drain valve

Radiator sight gauge

Radiator, package mounted

Jacket water pump, gear driven, centrifugal

Thermostats and housing

Standard

Exhaust manifold - dry

Optional

8" Muffler - 25 dBA attenuation

Manifold and turbocharger guards

Flexible exhaust connection

Standard

Primary fuel filter w/integral water separator and secondary filter, spin on

Engine fuel transfer pump

Fuel cooler

Fuel priming pump

Integral tank base, 24 hours, UL142

Standard

All protective devices and control functions simulated and checked

Complete system designed & built at ISO 9001:2000 certified facilities

Factory tested to design specifications at full load conditions

Standard

Insulation system, Class H

IP23 Protection

Standard winding protection for non-harsh environments with relative humidity ? 95%

6 Leads

Terminal box, IP22 RHS facing, bottom cable entry

Easy access to AVR and terminals

Brushless, self-excited 2/3 pitch (600V uses Internal excitation (IE))

Voltage regulator (single phase sensing)

Standard

Cat electronic governor (ADEM A4)

Standard

Fumes disposal to front of radiator

Lubricating oil, CK-4 (10W-30)

Oil cooler

Shallow oil pan

Oil filler and dipstick

Oil filter, spin on

Oil drain with valve

Standard

Captive linear vibration isolators between base and engine-generator

Includes lifting provisions and termination points for coolant and lube oil drain lines

Standard

Safety shutoff - Low oil pressure

Safety shutoff - High water temperature

Safety shutoff - Overspeed

Standard

24-volt electric starting motor

24V, 45 Amp Charging alternator

Standard

Lifting eyes

Vibration damper

Parts book

Optional

Generator test report

Extended Service Coverage

UL2200 Certification

CSA Certification

Optional

Audio & visual fuel alarm (@90% fuel level)

Integral tank base, 24 hours, UL142

5 Gallon Spill Containment

Fuel tank pill pipe & lockable cap

Overfill prevention valve

Wide Base - Skid

Optional

1200A LSI

1200A LS/I

600A LS/I

400A LS/I

800A LS/I

600A LSI

Auxiliary contacts

800A LSI

400A LSI

Optional

Twist release, Red button emergency stop

Ground fault relay

Volt free contacts

Audible alarm Gp

16 -light NFPA 99/110 Annunciator

20A GFCI (Ground Fault Circuit Interrupter)

100A Load center

Product link remote monitoring hardware

Optional

AC & DC Source lights

E-Stop

Sound attenuated Level 2 enclosure (White)

Optional

Space heater

Permanent magnet excitation (PMG) generator

Optional

4 Pole (IEC-100% rated) Circuit breaker - Motorised

Circuit breaker (IEC) Auxiliary contacts

Shunt trip for IEC circuit breaker

Optional

Oversize battery set, 1400 CCA, 200 amp/hr

Standard battery set: 1000 CCA, 90 amp/hr.

Jacket water heater

Battery charger (UL Certified)

Optional

Jacket water heater

Battery disconnect switch