C3.3 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote

Maximum Rating60.0 ekW

Minimum Rating27.0 ekW

Emissions/Fuel StrategyEU Stage II & R96/EUIIIa

Voltage110 to 480 Volts

Frequency60 Hz

Speed1800 rpm

Duty CycleStandby, Prime

Engine ModelCat® C3.3

Bore4.1in

Stroke5in

Displacement201.4in³

Compression Ratio17.25:1, 19.25:1

AspirationTurbocharged

Fuel SystemDirect Injection

Governor TypeMechanical

Length - Maximum43.9in

Width - Maximum38.2in

Height - Maximum53.6in

Standard

Air cleaner; light duty with disposable element

Standard

GCCP 1.3

Standard

Coolant drain line with valve

Caterpillar extended life coolant

Radiator and cooling fan with guards

Fan drive, battery charging alternator drive

Optional

Coolant heater

Low coolant level shutdown

Low coolant temperature alarm

Standard

Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose

Standard

Standard open set fuel tank/base supplied

Base, formed steel with single wall integral 8-hour fuel tank

Optional

Skidbase for CALG enclosure sets

Low fuel level shutdown

High fuel level alarm

Compact skidbase for open sets

Low fuel level alarm

Bunded fuel tank

Open set narrow tankbase

Standard

Circuit breaker, IEC, 3 pole, mounted in tower panel

IP23 Protection

Tower panel, IP22, bottom cable entry

12 Leads

Voltage regulator (single phase sensing)

Segregated low voltage (AC/DC) wiring panel

Standard

Mechanical governing system - model dependant

Mechanical and electrical governing system - model dependant

Standard

Lubricating oil

Oil drain line with valve

Standard

includes lifting provisions and termination points for coolant

Includes lifting provision and drag points

Termination points for coolant and lube oil drain lines

Captive linear vibration isolators between base and engine-generator

Standard

12V Battery with rack & cables

Standard

Engine and alternator pre-paint, Caterpillar yellow

Optional

Stone guards/rad trans flange

Packing case - compact set

Packing case - canopied set

Optional

LC Frame alternator

Anti-condensation heater

Permanent magnet excitation (PMG)

LC Frame alternator with coastal protection

R Frame auxilliary winding

Optional

Alternator removal options

Optional

4 Pole Circuit breaker to 250A

Padlockable breaker device

Optional

GCCP 1.3

Optional

Overload shutdown via breaker

Volt free contacts

Earth leakage (2 wire only)

Speed adjust potentiometer

Voltage adjust potentiometer

Battery charger

Control panel heater

Earth fault (2 wire only)

Panel mounted audible alarm

Emergency stop with key

Optional

European upgrade to STD set for "CE"

Global certification for CIS

Optional

CEE for sockets for enclosure

Socket blanking plate

Sound attenuated level 1 enclosure (GALV)

Sound attenuated level 2 enclosure CE

Rental pack (CAE only)

Optional

Silencer installation kit

Battery removal

Electronic governor

Residential silencer

External single point lift - enclosure

Optional

PGS Test report @ 0.8 power factor

PGS Test report @ 1.0 power factor

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.