Join the Blanchard Team..
Apply Now
Gas Standby Rating750 ekW @ 0.8pf
Fuel TypeNatural Gas, Hydrogen Blend (up to 5%)
Emissions/Fuel StrategyU.S. EPA Certified for Non-Emergency Stationary Genset
RPM1800 rpm
Frequency60 Hz
Displacement3173in³
Engine ModelG3512
Displacement3173in³
AspirationTA
Bore6.7in
Stroke7.5in
Governor TypeADEM A4
Length205.7in
Width90in
Height99.4in
Weight27500lb
Standard
Dual air cleaners, 1 per side, with service indicator
Two-element single-stage air cleaner with enclosure and service indicator
Optional
Mounting brackets and piping
Air cleaner with precleaner
Standard
Cat ECS 100
Optional
Remote annunciator
Local alarm module
Local PC monitoring
Engine failure relay
Remote PC monitoring
Standard
Engine driven pumps for jacket water and separate circuit aftercooler
Jacket water and SCAC engine-driven pumps
Jacket water and SCAC thermostats
LH or RG connections when radiator is not selected
Package mounted radiator
Optional
Coolant level drain line with valves, fan with guard
Remote radiator for JW and SCAC circuits, level switch included but not wired
Inlet/Outlet connections
Standard
NOx sensor based air-fuel-ratio control
0.5 to 5 psi engine fuel inlet pressure
Pipeline Natural Gas: 800-1000 BTU/scf and 70-100 Methane Number
Gas Train: NFPA37 and CSA B149.3
Standard
Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
Dry exhaust manifolds, insulated and shielded
Cat-flanged face outlet on turbocharger
Optional
305 mm (12in.) elbow
18, 25 dBA Attenuation
Flexible fittings
305 mm (12 in.) muffler
305mm (12 in) spark arresting muffler
305 mm (12 in.) flange
Standard
Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
Throttle plate, 24V DC actuator, controlled by GECM
Engine-installed electronic control valve
Gas pressure regulator
24V DC energized-to-run (ETR) gas shutoff valve
Optional
3, 0-100 kPag, 4-20mA gas train pressure sensors
Standard
Crankshaft vibration damper and guard
Operation and maintenance manuals
Parts book
Paint- Caterpillar Yellow except rails and radiators gloss black
RH Service
Optional
Special paint order
US AID emblem
Tool set
Digital diagnostic tool
Standard
Gear type lube oil pump
Cartridge style oil filter
Standard
Anti-condensation space heater
Winding temperature detectors
NEMA Class H insulation
SR5
Permanent Magnet Excitiation
Caterpillar's Digital Voltage Regulator (CDVR) including reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, and a min/max exciter
Optional
Cable access box
Generator air filter
European bus bars
Low voltage extension box
Bearing temperature detectors
Standard
ADEM A4
Standard
Individual Cylinder Detonation Sensitive Timing (DST)
Electronic Ignition System (controlled by ADEM A4)
Standard
ADEM A4 speed governor with 4 to 20ma (0V to 5V) speed input
Standard
24V DC starting motors
Batteries with rack and cables
Electric Starter
Optional
20A, 24VDC battery charger
Battery with cables and rack
Jacket water heater
45A, 24V charging alternator (requires engine driven pumps)
Optional
S LSI, G LSIG, P LSIG-P, 4th Digit Type
Right, left, rear mounted
1200A, 3 Pole, UL-100% Rated P-Frame Circuit Breakers
1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
2000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
3-pole (IEC 947-2 rated)
Frame mounting
Optional
60 Hz: USA
Complete this form to get a quote on the equipment you are interested in.
