G3520 2000kW Gas Generator Set

Gas Standby Rating2000 ekW @ 0.8pf

Fuel TypeNatural Gas, Hydrogen Blend (up to 5%)

Emissions/Fuel StrategyU.S. EPA Stationary Non-Emergency Certified

Frequency60 Hz

RPM1800 rpm

Compression Ratio11.5

Engine ModelG3520

Displacement5956in³

AspirationTA

Bore6.7in

Stroke8.5in

Length336in

Width94in

Height128in

Weight48500lb

Standard

Two-element single-stage air cleaner with enclosure and service indicator

Optional

Air cleaner with precleaner

Standard

Cat ECS 100

Optional

EMCP 4.4

Local alarm module

Engine failure relay

Remote annunciator

Remote PC monitoring

Local PC monitoring

Standard

Jacket water and SCAC engine-driven pumps

Jacket water and SCAC thermostats

Optional

Package mounted radiator

Coolant level drain line with valves, fan with guard

Standard

Dry exhaust manifolds, insulated and shielded

Cat-flanged face outlet on turbocharger

Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns

Optional

18, 25 dBA Attenuation

305mm (12 in) spark arresting muffler

305 mm (12in.) elbow

305 mm (12 in.) flange

305 mm (12 in.) muffler

Standard

Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve

Engine-installed electronic control valve

Gas pressure regulator

Throttle plate, 24V DC actuator, controlled by GECM

24V DC energized-to-run (ETR) gas shutoff valve

Optional

3, 0-100 kPag, 4-20mA gas train pressure sensors

Standard

Parts book

Paint- Caterpillar Yellow with high gloss black rails and radiator

Operation and maintenance manuals

Crankshaft vibration damper and guard

RH Service

Optional

Digital diagnostic tool

Standard

Permanent Magnet Excitiation

Integrated voltage regulator (IVR)

SR5

Winding temperature detectors

Anti-condensation space heater

NEMA Class H insulation

Optional

Bearing temperature detectors

Generator air filter

Cable access box

European bus bars

Low voltage extension box

Standard

24V starting motors

Battery with cables and rack (shipped loose)

Jacket water heater

Electric Starter

Optional

20A, 24VDC battery charger

45A, 24V charging alternator (requires engine driven pumps)

Standard

ADEM A4

Standard

Electronic Ignition System (controlled by ADEM A4)

Individual Cylinder Detonation Sensitive Timing (DST)

Optional

1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers

100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating

S LSI, G LSIG, P LSIG-P, 4th Digit Type

Frame mounting

3-pole (IEC 947-2 rated)

2000A, 2500A, 3000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers

Optional

60 Hz: USA

Coming Soon

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.