Gas Generator G3516H

Continuous Rating2027 / 2007 ekW @ 1.0pf

Fuel TypeNatural Gas, Hydrogen Blend (up to 25%)

Maximum Electrical Efficiency45.30%

Frequency50 / 60 Hz

RPM1500 rpm

Engine ModelG3516H

Displacement4765in³

AspirationTA

Bore6.7in

Stroke8.5in

Compression Ratio12.1

Fuel SystemNatural Gas

Length291in

Width84in

Height95in

Dry Weight - Genset40384lb

Standard

EMCP4.3

Optional

Remote monitoring software

Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay

Remote RS485, 32-light Annunciator

Cat Connect: Ehternet, Satellite, Cell Telematics

Cross-Current Compensation Current Transformer-- 8.7/15 kV Classes

RTD Module

Local/Remote PC Monitorring

16 Point/32 Light Annunciator with NFPA99-110/CSA282 Configuration

Remote Monitoring & Control

Synchronizing module

Local alarm module

Standard

Package Mounted Air Cleaner with service indicator

Two-element single-stage air cleaner with enclosure and service indicator

Optional

Mounting brackets and piping

Air cleaner with precleaner

Heavy Duty air cleaner with precleaner

Standard

Jacket water and SCAC driven thermostats

ANSI Class 150/DN custom flange connections for JW inlet and outlet

Engine driven water pumps for jacket water and after cooler

2nd stage SCAC-Cat Flange

Optional

Jacket water coolant heater

Inlet/Outlet connections

Standard

Center section cooled turbocharger with Cat flanged outlet

Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns

Dry exhaust manifolds, insulated and shielded

Cat-flanged face outlet on turbocharger

Optional

Flange

Muffler and spark-arresting muffler with ANSI companion flanges

Elbow

Standard

Throttle plate, 24V DC actuator, controlled by GECM

Electronic fuel metering valve

Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve

Standard

Electronic Ignition System (controlled by ADEM A4)

Individual Cylinder Detonation Sensitive Timing (DST)

Standard

Permanent Magnet Excitiation

Anti-condensation space heater

Winding temperature detectors

SR5

Reactive Droop

Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control

Optional

Manual voltage control

Generator air filter

Low voltage extension box

Medium and high voltage generators and attachment

Cable access box

Bearing temperature detectors

Standard

Crankshaft vibration damper and guard

Paint - Caterpillar Yellow except rails and radiators gloss black

RH Service

Parts book

Operation and maintenance manuals

Optional

US AID emblem

Special paint order

Battery diconnect switch

Digital diagnostic tool

Tool set

Battery with cables and rack (shipped loose)

Standard

ADEM A4 4-20mA (0-5V) Speed Input

Standard

24V starting motors

Optional

24V Battery Charger

60A, 24V charging alternator (requires engine driven pumps)

Optional

No UV trip or package mounted CB Wiring

Frame Mounting

MP-Frame 3 Pole Bottom Cable Entry or MP- Frame 6 Pole Bottom Cable Entry

4000A, 3-Pole IEC Rated

2500/3000/3200A or 4000/5000A Neutral Current Transformer Automatic Selection

Lower & Upper Covers, Extension Box Roof Cover

Busbar Mounting

4000A, 3-Pole UL Rated

Optional

60 Hz: USA

50 Hz: Germany, Great Britain, Belgium, Romania, Italy, Ireland, Poland, Netherlands, Spain, France, and European Standard

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.