Join the Blanchard Team..
Apply Now
Cat?� 3512 Industrial Diesel Fire Pump Engines, with ratings: 1066-1193 kW (1430-1600 hp) @ 1460-1750 rpm, are non-certified, not FM Approved, and not UL Listed. They are available for global non-regulated areas. Starting on demand is a must for a fire pump engine – always. Cat?� fire pump engines have a reputation for reliable starts and long efficient service. The Cat line of fire engine pumps covers a wide range of installations.
Request a QuoteMaximum Power1600hp
Rated Speed1460-1750 rpm
Minimum Power1430hp
EmissionsNon-Certified. Available for global non-regulated areas. Not FM Approved. Not UL Listed
Engine ConfigurationV-12, 4-Stroke-Cycle Diesel
Bore6.7in
Stroke7.5in
Displacement2105in³
Compression Ratio13.0:1
AspirationTurbocharged Aftercooled (TA)
Rotation from Flywheel EndCounterclockwise
Aftertreatment-
Length113.8in
Height68.6in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments13999lb
Standard
Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
Turbocharger, rear mounted
Jacket water aftercooled
Standard
Charging alternator 24 volt, 35 amp
Governor, RH, 3161 with self contained synthetic oil sump
Air-fuel ratio control
Mechanical speed control, without torque control
Governor control
Positive locking
Standard
Thermostats and housing
Jacket water pump, centrifugal
Standard
Exhaust manifold, dry
Standard
SAE No. 0 flywheel
151 flywheel teeth
SAE No. 0 flywheel housing
SAE standard rotation
Standard
Fuel filter, with service indicators, cartridge type with RH service
Fuel transfer pump
Standard
Instrument Panel, RH
Engine oil pressure gauge
Fuel pressure gauge
Oil filter differential gauge
Jacket water temperature gauge
Service meter, electric
Tachometer
Standard
Crankcase breather, top mounted
Oil cooler
Oil filler
Oil dipstick
Oil pump
Oil filter, cartridge type with RH service
Shallow oil pan
Fumes disposal (not installed)
Standard
Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
Included on selected top level engines
Standard
Accessory drive, upper RH
Front housing, single sided
Standard
Junction box
Manual shutoff, RH
Safety shutoff protection, energized to shutdown
Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
Water temperature
Overspeed
3161 governor solenoid energized to shutdown
Standard
Starting switch
Standard
Vibration damper
Lifting eyes
Paint: Caterpillar yellow, with optional colors available at request
Complete this form to get a quote on the equipment you are interested in.
