C4.4 (Electronic Control System)

C4.4 (Electronic Control System)

C4.4 (Electronic Control System)

Request a Quote

Power Range1500/1800 rpm

Frequency50 / 60

EmissionsU.S. EPA Tier 3 certified, EU Stage V certified

Rated Engine Speed1500/1800 rpm

Bore4.13in

Stroke5in

Displacement268in³

AspirationTurbocharged-aftercooled and turbo only aspiration (Turbocharged aspiration only for 65ekW (71bkW))

GovernorElectronic (A5 ECM)

Refill CapacityLube Oil System w/Oil filter change: 11 L 2.8 gal)

Oil Change Interval500 hours

CoolingHeat exchanger, combined circuit keel cooling, or separate circuit keel cooling

Flywheel HousingSAE No. 03 with SAE 11.5 flywheel (126 teeth)

ConfigurationIn-line 4, 4-stroke-cycle diesel

Maximum Length80.2in

Maximum Height78.7in

Maximum Width38.3in

Maximum Engine Dry Weight3389lb

Standard

Gear-driven jacket-water and auxiliary water pumps

Engine mounted air cleaner and expansion tank

Integral plate-type oil cooler

Standard

Watercooled exhaust manifold and turbocharger

Standard

Common Rail fuel system

Standard

Open crankcase ventilation system

Standard

Engine mounted fuel and oil filter

Engine mounted customer interface and control relays

Standard

12V or 24V starter motor

Standard

3-phase AREP generators with 300% short circuit capability

Digital Automatic Voltage Regulator

Class H generator insulation

Optional

MGGP 200 Gauge Panel and interface harness

Engine shutdown sensors and shutdown controller

Double wall high pressure fuel lines

EMCP engine control panel

MGCP II engine control panel

AC Voltage Monitoring

Glow plugs

Factory installed generator space heater kit

MCS Certifications

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.