C175-16 Offshore Generator Set

Minimum Rating2619kV·A

Maximum Rating3325kV·A

EmissionsAvailable in IMO Tier II/ EPA Marine Tier 2 configurations

Stroke8.7in

Weight53599lb

Oil Change Interval1000h

Fuel SystemCommon Rail/EUI™

Engine ControlDual ADEM™ A4

Generator Set ControlMPD 3.0 / Cat® Alarm and Protection System

Bore6.9in

Displacement5164in³

AspirationTurbocharged/2-stage aftercooled

Speed1200/1500/1800 rpm

Height50 Hz - 2928 (115 in) / 60 Hz - 2916 mm ( 115 in)

Width50 Hz - 2413 mm (95 in) / 60 Hz - 2125 mm (84 in)

Length50 Hz - 6782 mm (267 in) / 60 Hz - 6742 mm (265 in)

Cooling System - Engine92gal (US)

Lube Oil System - Refill250gal (US)

Standard

Dual turbochargers

Corrosion-resistant aftercooler core

Air cleaners — single or dual element

Optional

Air cleaner service indicator

Standard

Dry exhaust manifolds with thermo-laminated heat shields

Dual turbochargers with water-cooled bearings and thermo-laminated heat shields

Vertical exhaust outlet

Flange and exhaust expanders

Standard

Separate-circuit-aftercooler (SCAC) and jacket water (JW) circuit cooling system

Gear-driven centrifugal pumps, one for each circuit

SCAC electronic thermostat, outlet-controlled with aftercooler inlet temperature sensing

JW electronic thermostat, outlet-controlled with outlet temperature sensing

Engine oil cooler in JW circuit

Optional

9 kW, 240V, 60 hz jacket water heater

Custom jacket water heater

Standard

Cat common rail high-pressure fuel system with electronically controlled unit injectors

Duplex primary fuel filter with water separator

Duplex secondary/tertiary fuel filters

Electric fuel priming pump

Gear-driven low pressure transfer pump

Gear-driven high pressure transfer pump

Double-walled high pressure fuel lines

Fuel pressure, temperature, and leak detection sensors

Optional

Four canister duplex oil filter

Standard

Engine-driven, gear-type oil pump

Integral lube oil cooler

Front-mounted oil drain lines and valve

Oil sampling valve

Filler and dipstick

Four-canister simplex oil filter

Prelube pump — electric, air, or custom

Fumes disposal with crankcase breathers

Crankcase explosion relief valves

Standard

Dual ADEM A4 engine control unit (ECU) for redundancy

Software monitors engine parameters and performs alarm, derate, and shutdown functions

Rigid wiring harness

Marine Power Display 3.0 (MPD 3.0)

Optional

Cat Alarm and Protection System

Communication module PL1000T/E

Direct-rack control

Thermocouples

Metal particle detector

SOLAS spray shielding

Standard

Inner-outer base with vibration isolators

Optional

Custom I-beam base with vibration isolators

Standard

Kato brushless permanent magnet 6P6.6-3200 HR

2-bearing, close-coupled arrangement

60 Hz, 600V, 0.7 PF

UL/CSA listed, IP23

Optional

Custom generator

Standard

Flywheel housing, SAE No. 00

Flywheel, SAE No. 00

ABS certified, non-certified, or custom-coupling and coupling mounting

Free-standing or close-coupled generator set arrangements

Standard

Turbine air starter or

Dual electric starting motors or

Air and electric starting motors (redundant)

Standard

Power distribution box — 24V or custom

20A battery charger

Cat yellow paint

Offshore oil field sub-base

Integral spring isolators with limit stop

Lift provisions on base

Oil drain extension

Engine length drip pan with drain

Torsional dampened driveline couplings

Optional

TVA report

Special tests

Project-specific installation drawings

P&ID-electrical drawings

Spare parts kit

Barring group

Engine lifting group

Custom generators and radiators