G3608 A4 Gas Compression Engine

G3600 ADEM™4 engines provide a wide range of power options to fit your gas compression application. G3600 ADEM™4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 ADEM™4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 ADEM™4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3608 ADEM™4 Gen 1 gas engine with standard ratings: 1864 bkW (2500 bhp) @ 1000 rpm and Cat G3608 ADEM™4 Gen 2 gas engine standard ratings: 1864 bkW (2500 bhp) @ 1000 rpm and uprated ratings: 2051 bKW (2750 bhp) @ 1000 rpm. NSPS site compliant capable.

Request a Quote

Maximum Rating2750BHP

Rated Speed1000rpm

EmissionsLean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

Minimum Rating2500BHP

Compression RatioGen 1 (9.2:1) Gen 2 (7:6:1)

Length199.62in

AspirationTurbocharged-Aftercooled

Width2188.8mm

Rotation from Flywheel EndCounterclockwise

Displacement10350in³

Height116.18in

Flywheel Teeth255

Oil Change Interval5000 hours

Ignition, ProtectionADEM™4

Stroke11.8in

Weight - Dry46500lb

Bore11.8in

Cooling System140gal (US)

Lube Oil System - Refill241gal (US)

Standard

Air Cleaner

Air Inlet Adapter

Optional

Heavy-duty air cleaner — with precleaners

Standard

ADEM 4

Optional

Software Development

Standard

ANSI Class 150 4 inch Flange (outlet water connection)

ANSI Class 150 6 inch Flange (Inlet Water connection)

Engine driven water pump

Water Jacket Outlet Regulator 88° C

Standard

Engine rating and speed selection

Standard

Hard heat shielded exhaust manifolds. SAE Standard

Vertical Exhaust Outlet

Optional

Exhaust Expander

Flex EXH Fitting

Weld Flange EXH

Standard

Flywheel SAE Standard

Standard

ANSI Class 150 2 inch Flange (Customer Connection)

Fuel Filter

Gas Pressure regulator

Optional

Fuel Connection

Standard

Paint

Optional

Language Decals

Service Tools

Standard

Basic HMI Engine Interface

Standard

Breathers

Closed Crankcase ventilation system

Engine driven oil pump

Front and Rear Oil Drains

Oil filter

Oil Pan

Oil Supply line

Pre-lubrication Pump

Temperature regulated oil cooler

Optional

Lubricating Oil

Oil Level regulator

Standard

Six mounting feet

Optional

Six mounting plates

Standard

Two Lifting eyes

Standard

Damper guard, Stub Shaft

Single Damper

Standard

Crankcase explosion relief valve

Standard

Air starting motor

Engine Barring Device

Standard

Cat Connect Technology

Optional

Cell - Satellite Radio

Interconnect Harness

LAN Adapter

Product Link Harness

G3608 A4 Gas Compression Engine